HandyTimo

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Washing machine advice #429035
    HandyTimo
    Participant

    Re: Washing machine advice

    Miele with the extra 3 years. I suspect you would be disappointed with a high end Bosch in comparison. If you’re prepared to spend the money that is.

    in reply to: C00224176 – ToC for Creda built under #428242
    HandyTimo
    Participant

    Re: C00224176 – ToC for Creda built under

    Yes please, that would be great

    in reply to: Bosch WAQ283S0 #428261
    HandyTimo
    Participant

    Re: Bosch WAQ283S0

    I’ve sold lots of these. No issues as of yet. Hopefully just a bad batch.

    in reply to: C00224176 – ToC for Creda built under #428239
    HandyTimo
    Participant

    Re: C00224176 – ToC for Creda built under

    Hi,

    s420e I think

    in reply to: Whirlpool Toploader 3rlsq8000 #422502
    HandyTimo
    Participant

    Re: Whirlpool Toploader 3rlsq8000

    Hi,

    The drum seems to move freely anti clockwise then jams until I apply a lot of force to free the tub. It jams completely and is very hard to move clockwise. I’ve checked between the tubs and there is no washing to obstruct movement.

    Everything on the clutch has been swapped out with what Whirlpool supply in the kit (everything apart from the metal housing,)

    Do you think it could be an issue with the transmission / gearbox ? I seem to recall it uses a different cog for if it is agitating or spinning,

    Timo

    in reply to: Whirlpool Toploader 3rlsq8000 #422500
    HandyTimo
    Participant

    Re: Whirlpool Toploader 3rlsq8000

    I will take the cabinet off as suggested. The drum struggles to even agitate let alone spin now. Possibly brake issue, meaning they have ceased the drum in place. The the temperature of the motor does not exceed what I believe to be normal.

    I will investigate and feed back,

    Apprechiate the replies guys,

    Timo

Viewing 6 posts - 1 through 6 (of 6 total)