Hawkeye777

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Indesit IDCE8450BK Tuble Dryer error code F14 #464288
    Hawkeye777
    Participant

    Apologies for the late, late reply

    The fix for this issue, was the renewal of the heater

    in reply to: Indesit IDCE8450BK Tuble Dryer error code F14 #464286
    Hawkeye777
    Participant

    Thanks for the reply, I think the thermister comes complete with the element and the two thermostats, if I purchase this, do you think it will solve the F14 code?

    Mark

    in reply to: Beko WMB 61631S Power issue #435572
    Hawkeye777
    Participant

    Re: Beko WMB 61631S Power issue

    Yes Seamy, your assumption was correct, deep down that was my initial thought as well but it was good to have other options to what could have been at fault as well, thanks for all the comments guy’s.

    Mark

    in reply to: Beko WMB 61631S Power issue #435570
    Hawkeye777
    Participant

    Re: Beko WMB 61631S Power issue

    live and neutral going directly to on/off selection dial, all other components, door switch, brushes, heating element, check out fine.

    Mark

    in reply to: Stoves Newhome Envoy 550SI, Model No 059054121 #434335
    Hawkeye777
    Participant

    Re: Stoves Newhome Envoy 550SI, Model No 059054121

    Thanks for the prompt reply Dave, just to give an update about the info I received from Stoves, they had the spark ignition switch in stock, but apparently the spark generator for this model has become obsolete, hope this info will help other users in future.

    Cheers

    Mark

    in reply to: Washing machine wont work after a power cut. #420253
    Hawkeye777
    Participant

    Re: Washing machine wont work after a power cut.

    Thanks Martin for your pointer, it was in fact the power board that controlled the motor, two tracks had disintegrated due to a power surge I guess also one track on the top pcb had gone, managed to salvage that one but had to get a new board for the motor (to much damage) at the end of the day washing machine has been repaired and one happy customer, once again thanks for the assistance.

    in reply to: Pro Action Plus A105Q Spare Parts #410726
    Hawkeye777
    Participant

    Re: Pro Action Plus A105Q Spare Parts

    Much appreciated jackal, will give that a try, thanks once again.

Viewing 7 posts - 1 through 7 (of 7 total)