hbrac

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 97 total)
  • Author
    Posts
  • in reply to: Disposal of old microwave #254028
    hbrac
    Participant

    Re: Disposal of old microwave

    I could load it into the car then and take it to Create. No probs. Thanks for your advice once again !!

    in reply to: Bosch Maxx WFL 2450 #254021
    hbrac
    Participant

    Re: Bosch Maxx WFL 2450

    You’re both wrong….it’s an extremely shiny 10 cents (Euro) OOoo….I’m made up ( as they say in Liverpool ). Could this be the cause of my washing machine malfunction ? If so you guys may have saved me a call out fee. I’ll do another wash tomorrow and see.

    in reply to: Disposal of old microwave #254026
    hbrac
    Participant

    Re: Disposal of old microwave

    Hi Gegsy. I’m familiar with Create. If you ring the local council they will take things away and pass onto Create if salvageable. I just wondered because of the microwave radiation.

    in reply to: Bosch Maxx WFL 2450 #254018
    hbrac
    Participant

    Re: Bosch Maxx WFL 2450

    I’m off to take a look now. Thanks !!

    in reply to: John Lewis Tumble Dryer going back #251813
    hbrac
    Participant

    Re: John Lewis Tumble Dryer going back

    In that case Penguin…the job is yours 😆 😆

    in reply to: John Lewis Tumble Dryer going back #251811
    hbrac
    Participant

    Re: John Lewis Tumble Dryer going back

    Just a thought…who makes this particular dryer ? I’ve read that some are not as good as others.

    in reply to: John Lewis Tumble Dryer going back #251810
    hbrac
    Participant

    Re: John Lewis Tumble Dryer going back

    Hi there Don
    Thanks for your prompt response. Reassuring to find that you have some faith in the Bosch dryers !!! Only one thing missing from the spec….someone to fold and iron the clothes for me :rolling:

    in reply to: Black mould in dispenser compartment #237846
    hbrac
    Participant

    Re: Black mould in dispenser compartment

    Now I think about it, HG do a range of sprays. I might have a look at the other ones and go onto the website. Reading the instructions on the mould spray bottle it seems suitable for just about anywhere as long as there is no metal or aluminium. May give it a go if I am feeling brave :rolls:

    in reply to: Black mould in dispenser compartment #237844
    hbrac
    Participant

    Re: Black mould in dispenser compartment

    Thanks for the link KW. I do all the right things with the brush including the maintenance wash on 90. The Mould spray is quite effective in my shower so….would it harm the plastic in the dispenser of my machine? It doesn’t seem to affect my plastic shower tray.

    in reply to: Bosch WFT2800 Fabric Conditioner Compartment #236816
    hbrac
    Participant

    Re: Bosch WFT2800 Fabric Conditioner Compartment

    Black mould is the bain of my life. I too use the plant spray of diluted bleach method.That and cotton buds to clear out the fabric conditioner section. Just a thought. I use HG mould spray on my silicone sealant in the shower. Could I use it in the soap dispenser too?

    in reply to: Wanted…Instruction Manual Zanussi ZWD 1471S #235774
    hbrac
    Participant

    Re: Wanted…Instruction Manual Zanussi ZWD 1471S

    Thanks Simon 😀

    in reply to: Wanted…Instruction Manual Zanussi ZWD 1471S #235772
    hbrac
    Participant

    Re: Wanted…Instruction Manual Zanussi ZWD 1471S

    Cheers !! Extra fish for you tonight Penguin 😀

    Is there any difference between the 2 sets of instructions on the 2 links? Both include the ZWD 1471S.They look the same.

    Having never owned a WD myself can I be really thick and ask where the condensed water goes after drying?

    Do you have to manually empty a chamber or does it go out the same way as the water from the wash 😳

    in reply to: Wanted…Instruction Manual Zanussi ZWD 1471S #235770
    hbrac
    Participant

    Re: Wanted…Instruction Manual Zanussi ZWD 1471S

    OK Martin. Will do. Thanks.

    in reply to: Bosch integrated larder fridge temp problem #234980
    hbrac
    Participant

    Re: Bosch integrated larder fridge temp problem

    Well the engineer thinks that there is nothing wrong with the fridge.It may be over full 😯 .As we speak it seems to be OK. He didn’t think it was the thermostat or a door problem .He’ll give us a week and then bill us a modest call out charge.

    in reply to: Bosch integrated larder fridge temp problem #234979
    hbrac
    Participant

    Re: Bosch integrated larder fridge temp problem

    I’ll get the guy to check that out tomorrow Superfix. Thank you for your input.

Viewing 15 posts - 61 through 75 (of 97 total)