heroblob

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Zanussi ZOB140X – Electric Grill not working #407473
    heroblob
    Participant

    Re: Zanussi ZOB140X – Electric Grill not working

    Hi
    Your top element may work when selected to be used as an oven as it is possible it has four terminals. The outer edge will heat up for oven use (the square looking element), yet when grill is selected the inner element should heat up if this is not happening change the element ensuring mains to the oven is OFF

    in reply to: Access to stoves base element #407415
    heroblob
    Participant

    Re: Access to stoves base element

    Job done, for others attempting this I would suggest wearing a dust mask and removing bottom storage drawer completely.Remove insulation from underneath cavity as neatly as you can, as this will help sticking it back together.Remove plate from below element, you can now see the offending item, now remove fan element cover from within cavity and you will notice a screw at the bottom centre line of oven cavity, this is what is holding the element in place,remove this and withdraw damaged element. Replace element, plate and insulation.

    in reply to: Access to stoves base element #407413
    heroblob
    Participant

    Re: Access to stoves base element

    This is what I thought, but again there Is no obvious signs,at the rear of the appliance where the terminals are there seems to be some sort of plate covering the entire cavity and again it is wrapped in insulation.

Viewing 3 posts - 1 through 3 (of 3 total)