Forum Replies Created
-
AuthorPosts
-
Howie
ParticipantRe: American Fridge Freezer Whirlpool S20BRSS31-A-G
Told that the machine is about 18mths old.I know that there is a delay on start up but I’m sure that when I’ve fitted a rear board previously it’s started up within about 5 mins.
HowieHowie
ParticipantRe: American Fridge Freezer Whirlpool S20BRSS31-A-G
Original fault was ff display showing -18 and +4 but only internal evap. fan running. I fitted new rear pcb but still same so I assumed it must be the front pcb. Fitted orig. pcb back and returned to fit new front board. Still same but now CF shows up after a couple of mins. I have also checked the connector under the top hinge cover which is ok.
Howie
ParticipantRe: Whirlpool frost free u/freezer AFG3680
Thanks for reply Dave. The freezer doesn’t show fault codes.The alarm is sounding from start up all the way through to reaching correct temp and then continuing (apart from when it is cancelled by the button for about 5 mins.) Whenever I have fitted boards to these in the past the audible alrm doesn’t sound when it is reaching temp.
Howie
ParticipantRe: Scaiola cake display (4 glass sides)
Thanks pup, tried this number but there is either no ansa or it’s on fax. Have you any other number.
Howie
ParticipantRe: Scaiola cake display (4 glass sides)
Unfortunately it isn’t a tangential fan.The nearest one I can find that would fit is a square axial frame axial fan (172×150) but it is not strong enough to circulate the air i.e. 23w as opposed to 43w.
Howie
ParticipantRe: Scaiola cake display (4 glass sides)
Thanks Dave, tried these but they couldn’t help.
-
AuthorPosts
