[joejoe]

Re: Baumatic cooker door no longer staying shut tight

Thanks, and you’re right, it often ends in tears!!

The door has been off before, by an engineer, but the missus was in, not me. So, as you might expect, rather than watching the engineer and being interested in what he was doing, the mind just went blank and was probably at the shops. Sound familiar?

Anyway, all that can be remembered is the door came off quickly and easily. I’ll checkout the manual ( I keep ’em all ).

Thanks again for the prompt input. Just waiting Dave about the parts.

[joejoe]

Re: Baumatic cooker door no longer staying shut tight

Thankyou, I’ll do that. I’m quite handy around the house so I should be able to get the door off. However, how it comes off is another story. My model is infact a 2750. There is some suggestion that it is a matter of just putting two screws between the door and the hinge and slightly closing the door and then pulling it off.

Does that sound familiar?

[joejoe]

Re: Smeg DWI67.1 – No display or response

Same problem. PCB had gone. £200+ is what it will cost.

Damn thing has something else wrong with it now. SMEG = Expensive rubbish. Will be buying a cheap unit next time, with warranty, much more effective use of my money I suspect.

[joejoe]

Re: Smeg Dishwasher no power

Ta M8.

[joejoe]

Re: Smeg Dishwasher no power

Ta.

3 Months outside my extended 3 year warranty, did I mention that? 😉

As long as it’s likely to be an electrical failure, I’m happy to go for callout as at least it’s something I couldn’t deal with. If it was due to a water blockage, I’d be kicking myself!!

[Author]

Posts