[jof]

Re: Whirlpool ADG7560 Fills then Empties

no sign of any water in the base. What is the best way to check the wash pump? Thanks

[jof]

Re: Whirlpool ADG7560 Fills then Empties

Anybody? 🙁

[jof]

Re: Hoover VHD8142

couldn’t see anything when i looked but will have 2 go and have another look thanks

[jof]

Re: Zanussi zwf16581w Permantly draining

How do you g into diagnostics? Do you mean fill with water manual and just let it drain? Thanks

[jof]

Re: Hotpoint WF541 all lights flashing

Changed the capacitor and is now working fine. Spot on 😀
Many thanks for the help

[jof]

Re: Hotpoint wf210 energy save light flashing

Well according to that it is the heater relay. But can’t understand why the heater would be a problem on the drain program or the spin? Anybody able to shed some light thanks

[jof]

Re: Bosch WTA606

Do you know what ressistance they should be reading?
Many thanks

[jof]

Re: Bosch WTA606

Have been back to the machine to check for blockages ect but all clear. Tried it with wet clothes in and is not drying at all. Checked the vent and there is plent of air flow but its cold any ideas?
Many thanks

[jof]

Re: Bosch WTA606

Many thanks for the info will give it a try 😀

[jof]

Re: Bosch WTA606

Bosch Maxx WTA3606 GB
101 FD 8401 200168

Sorry just realised i missed the 3 out on the title 😕

[jof]

Re: LG w/m displaying pe

have checked pipe for blockage as i have found a few before that had built up with slime. this caused the machine to over fill with water.
So the part i need to check is what the vacum pipe is connected to?
many thanks 🙂

Lucky Goldstar

[jof]

Re: LG w/m displaying pe

What does this look like and where is it suituated?
Many thanks 🙂

[Author]

Posts