[judderman]

Re: Bosch Logixx SRS56A08GB

Martin wrote:

judderman wrote:
That sound’s technical lol whereabouts is that located? Is it an easy-ish DIY job?

It is connected between the sump and the main circulation pump motor unit. And no it is far from a simple DIY job, costly too!:(

Thanks again. 😉
I just googled “bosch Dishwasher Diverter Valve” and read this on diynot.com

Heater assembly has an alternator valve in it – this switches the water between the top and bottom rotors. It will have mechanically jammed or electrically failed. not a easy job, part is about 90.00 from bosch ,total strip down of dishwasher and i mean total door off wireloom off tub out the lot .i would save the money towards a new dishwasher .plus if you do it, it will need taking apart again cos of a water leak not good at sealing once they been apart

http://www.diynot.com/forums/viewtopic.php?t=188960

So the search begins for a new D/W. :rolls:

[judderman]

Re: Bosch Logixx SRS56A08GB

Martin wrote:The water point (diverter) device has failed. It forms part on the ‘instantaneous water heater’ and will need replacing in order to cure the fault. 🙁

Thanks for the speedy reply Martin 😉
That sound’s technical lol whereabouts is that located? Is it an easy-ish DIY job?

Thanks.

[judderman]

Re: Indesit W1235

Many thanks for the quick detailed reply Iadom. 🙂
Sounds like its goosed then 😥 oh well time for a Bosch. 8)

Thanks again.

[Author]

Posts