JustinL

Forum Replies Created

Viewing 8 posts - 16 through 23 (of 23 total)
1 2
  • Author
    Posts
  • June 8, 2009 at 11:15 am in reply to: Faulty Bosch SGI 5322 Dishwasher #287959
    JustinL
    Participant

    Re: Faulty Bosch SGI 5322 Dishwasher

    Penguin45 wrote:HERE.

    Penguin45.

    Thanks Penguin, ordered and received, hopefully get it fitted this week and n more washing up.

    June 5, 2009 at 12:15 pm in reply to: Faulty Bosch SGI 5322 Dishwasher #287957
    JustinL
    Participant

    Re: Faulty Bosch SGI 5322 Dishwasher

    someone in the trade did me a favour and had a look for me, he advised the pump had failed. Is it worthwhile replacing it on this model or getting a new dishwasher entirely?

    cheers

    May 28, 2009 at 12:45 pm in reply to: Faulty Bosch SGI 5322 Dishwasher #287956
    JustinL
    Participant

    Re: Faulty Bosch SGI 5322 Dishwasher

    I asked my wife to do a 35 quick wash, this one completed however the suds at the bottom of the dishwasher hadn’t drained…would this point more to a blockage as Galway/Penguin45 suggested more than the pcb/heating element?

    May 28, 2009 at 8:09 am in reply to: Faulty Bosch SGI 5322 Dishwasher #287955
    JustinL
    Participant

    Re: Faulty Bosch SGI 5322 Dishwasher

    Thanks for the replies I will see if I can drag someone over to have a look before I get a repairer out.

    January 20, 2009 at 7:51 pm in reply to: Problem with Miele Platinum 6 Washing Machine #273120
    JustinL
    Participant

    Re: Problem with Miele Platinum 6 Washing Machine

    Well guess what it’s gone again! I was just feeling the cold water pipe connected to the washing machine, both the pipe and the hose feel hot, as it is only the cold water pipe that is connected should this be the case? The stopcock is labelled blue?

    Just wondering if the heat in the pipe is just due to the flow of water under pressure entering the washing machine?

    January 13, 2009 at 6:52 pm in reply to: Problem with Miele Platinum 6 Washing Machine #273118
    JustinL
    Participant

    Re: Problem with Miele Platinum 6 Washing Machine

    Thought I would let you know I booked an engineer to come over today but suddenly over the weekend it started working normally again so finers crossed.

    Once again appreciate the advice given


    Justin

    January 6, 2009 at 7:15 pm in reply to: Problem with Miele Platinum 6 Washing Machine #273115
    JustinL
    Participant

    Re: Problem with Miele Platinum 6 Washing Machine

    Hi,

    I tried to find what you suggested re low water pressure, but there are no settings, also it seems the Miele is autosensing and can work with extremely low water pressure. As I said before the pressure to me seems fine. Any other ideas or I guess I will have to contact an engineer, I think Glotech is recommended by yourselves?

    Thanks

    Justin

    January 6, 2009 at 4:11 pm in reply to: Problem with Miele Platinum 6 Washing Machine #273114
    JustinL
    Participant

    Re: Problem with Miele Platinum 6 Washing Machine

    Hi Phil,

    Thanks for the advice, I will check this out later on when I get home, strange as it seems to happen even if we aren’t using any water and the tap water pressure seems fine. The only think that has changed recently is we had a new Valiant Boiler fitted, can’t see that taking all the water though.

    I’ll let you know my findings.

    Justin

  • Author
    Posts
Viewing 8 posts - 16 through 23 (of 23 total)
1 2