Forum Replies Created
-
Posts
-
Re: Fisher & Paykel dd603h ‘fill fault’
no-one with an idea of what exchanging 2 watersoftener modules will cost?
im trying to figure out if i should just buy a new dishwasher…
btw on that note anyone with good experiences with another dishdrawer model or a similar product from another vendor?
thanks for the help
Re: Fisher & Paykel dd603h ‘fill fault’
Ok i tried running the inlet valve test in the diagnostics/hardware-test mode..
the inlet below becomes pressurized as soon as I turn on water inlet, so the problem/blockage must be beyond this point (the inlet valve is before this point!)
that is my conclusion too, theres two valves located at the base of the machine, right where the inlet splits in two..
so the most probable thing is that the one for the top drawer is busted, I assume it is this part:
526850 VALVE INLET DOUBLE W/SOFT DHRe: dd603h ‘fill fault’
*thanks for replying
yes I unplugged it before taking off the plate,but obviously the hardware check can only be run when the unit is plugged in 😉
it is and has always been attached to cold water.
‘filter blocked on mains supply’ … the bottom drawer works, so it is something that only affects the top drawer..
Re: dd603h ‘fill fault’
ive managed to get hold of the service manual…
after running hw check it is clear that the problem is getting water _in_
it just drizzles ever so slightly..
another question what is the brown stuff in the image?
Re: smeg microwave fme20ex, dead on arrival?
service came today.
looked at it blinking and acting crazy, mumbled something (or maybe it was just my hangover 😉 )
then decided to take the unit in for service
…to be continued….Re: SMEG oven light stays on
ok it appears that me contacting smeg international, made the difference.
now everything seems to be in order 😀
Re: smeg microwave fme20ex, dead on arrival?
thers no sticker _on_the unit, but the leaflets say 220-230 / 50hz
Re: smeg microwave fme20ex, dead on arrival?
Ive tried 3 different sockets, on two different fuse-groups
Its 230-50hz here in denmark too the fridge I got from italy is running with no problems (so far 😯 )
Re: smeg microwave fme20ex, dead on arrival?
one of my friends that is an electrician, says that many such whitegoods today have an reset option, since it might just be the computer inside thats crashed.
does anyone know if that is the case for this model, and if so what is the way to do it?
