Forum Replies Created
-
Posts
-
Re: Zanussi ZWF1221 smoking
If the drum was moving okay it may just have been ready to go.
When you overload the belt will slip (common enough) giving a flat spot, overload again and it’ll often catch the same spot again or stop on it but the motor still runs. A few times of that and you get what you’ve got there as the motor pulley effectively slices through the belt.
K.
Re: Zanussi ZWF1221 smoking
Yup, should be and the cheap version of it is this one:
http://shop.ukwhitegoods.co.uk/zn0803-a … drive-belt
K.
Re: Zanussi ZWF1221 smoking
Possibly the belt but I’d suggest opening it up to see if anything is obviously wrong before doing much of anything.
K.
Re: Blomberg wnf6341 not spinning
Brushes worn down? Possible and it does appear to use a brushed motor according to the tech on it.
K.
Re: LAMONA HJA8360 DISHWASHER
It sounds like you’ve managed to get it into a test mode, that’s the only way all the lights should be on.
I *think* pressing the start/stop and program buttons together and holding for three seconds or so should get it back out of it but, it’s not the clearest instructions ever.
K.
Re: Grundig D/Washer stuck in Demo Mode
I trawled through all the tech docs for both versions and, not a thing on it anywhere! 😕
K.
Re: Britannia fan motor
Genuine:
https://shop.ukwhitegoods.co.uk/g40610- … oven-motor
Copy/pattern:
https://shop.ukwhitegoods.co.uk/mtr8001 … -fan-motor
Copy one cane take a bit of faffing to fit but, works.
K.
Re: Britannia cooker hood
Email Dave on spares@ukwhitegoods.co.uk as, if they can be sourced, he’s the guy that’ll find them for you.
K.
Re: Whirlpool to do a recall on Hotpoint dryers
That’s been going on for a while, the inquest is under way, there was news on here yesterday about it I think.
K.
Re: Location of Sensor beko f f – help please
Good luck with that, the parts diagrams don’t show where they are and I doubt you’d get to anyone that would know.
K.
Re: Electrolux paint colours(white)
The only people that will know that are Electrolux themselves I’d think.
K.
Re: Location of Sensor beko f f – help please
The sensor is buried in the insulation so you kinda just have to position it inside I think, ask Dave for the info sheet on it. It’s not the best but kinda makes sense.
K.
Re: want spares, Try Amazon !!
Yeah and we’re often cheaper than Amazon. 😉
I wonder how many people on here realise that the FREE service you enjoy is paid for by the spares store here?
K.
Re: Water filling to max in bleach compartment Indesit IWME
You may find this of use…
http://www.ukwhitegoods.co.uk/help/fix- … ner-issues
K.
