[LanciaMad]

[USER=”57345″]Bekoranger[/USER] sure, I got the wiring diagram from beko website in the parts and accessories section, they don’t appear to list the diagram for every model but most of them. I
just fixed my issue actually, whicht was the fridges sensor – I was just baffled that the two sensors I bought had different names but essentially they’re identical thermistors bar packaging and varying fitting bits and bobs.

Three sensors is mad lol.

[LanciaMad]

electrofix wrote:well the problem cant be there anyway. the air around that unit has to be cold enough to freeze to below -18. All looks ok to me. Normally there is a motorised flap inside the fridge that is controlled through the board by a fridge temp sensor. thats the area you want to look

Dave

True thanks Dave, no I am thinking its the fridge sensor, I was just curious whilst I was in the freezer if this was normal. Thanks for confirming. For the fridge problem I’ve lashed this together with a new sensor and the ice at the back of the fridge is finally melting. So time to start digging at the back for the permanent solution I think.

[LanciaMad]

My bad, I just found this:
http://www.ukwhitegoods.co.uk/help/fix-it-yourself/specific-faults/4061-beko-fridge-freezer-thermistors

Thanks for replying!

[Author]

Posts