[lozkb]

Re: Zanussi IZ141 E52 error code

Thanks helo – do you mean the contact to the element?

When I was looking about having a preliminary look, I couldn’t help myself and pulled the element out just to have a look! Could I have knackered the element by doing that, or perhaps I didn’t connect it back properly.

Many thanks

[lozkb]

Re: Zanussi IZ141 E52 error code

I’ve run through the diagnostics now and it still comes with the E52 error code. Any ideas………please?

[lozkb]

Re: Zanussi IZ141 E52 error code

Many thanks Spindoctor, I replaced the carbon brushes as they were very low – that seems to have done the trick in so far as it will now start washing.

Having just put it back together and given it a test run, it’s created another problem. It starts the washing cycle and will not progress past 1min 53 on a cotton wash (starts at 2min 13) or 43mins on a quick wash. It’s filling with water and washing, but not progressing past these points.

I’ve not done the diagnostics to get an error code yet, but in the meantime, has anyone got an idea where the problem could be?

Thanks again!

[lozkb]

Re: Zanussi stopping mid-cycle – heating element?

OK, I’ll give that a try. If that doesn’t cure it, do you think it could be the heating element?

[lozkb]

Re: Zanussi stopping mid-cycle – heating element?

Thank you for your reply – is that the pump at the bottom front of the machine linked to the waste hose?

It has been making a grinding noise for some time which I just left as it seemed to be working ok.

[Author]

Posts