[madmatt]

Re: Zanussi ZDC47100w Tumble drier error codes

Pants………..Any reason why I shouldn`t keep using it until it completely stops?

Is there a more conclusive way of testing the PCB – sounds expensive 🙁

Steve

[madmatt]

Re: Zanussi ZDC47100w Tumble drier error codes

Hi Martin. Thanks again for the help.

I have followed your instructions carefully and have also used a handy teenager to check my work 🙂

If I do as you say, when I rotate the dial to the 75 position (10 clicks in), all I get is a flashing green Start/Pause plus 3 separate green led`s for Drying/cooling/end and one separate led for Cottons.

If I follow your instructions, but stop before rotating the dial, I get 8 reds and three greens.

Fault is still same. Load machine and press start button, machine starts then stops and beeps. Sometimes have to have two or three goes at this until it keeps going.

Any further assistance appreciated.

Thanks

Steve

[madmatt]

Re: Zanussi ZDC47100w Tumble drier error codes

Hi Martin

Trying your test. Can you please confirm;

“Turn dial to 1 O`clock position” means move the dial clockwise from Off to the first position?

“Turn dial clockwise to the 10th position”. Does this mean exactly what you say – move the dial to the 10th position or does it mean move the dial on 10 clicks?

Sorry to sound like a numpty but I have yet to get a consistent result.

Thanks Steve

[madmatt]

Re: Zanussi ZDC47100w Tumble drier error codes

H Captaincaveman1. Thank you so much for the reply and assistance.

I have tested the machine again and tried a number of different dial positions and get the same 8 red, 3 green flashes.

Perhaps I`m still missing something critical? I position the dial (anywhere other than position 1), press start and the button to its left and after a couple of seconds get three beeps and all the lights go out. I let go of the buttons and then I get 8 red followed by 3 green, then a pause followed by a constant flashing green and 4 of the other green lights on steady.

Tried this a few times with different dial positions and got the same results ever time.

Your thoughts on the next move appreciated.

Thanks

Steve

[madmatt]

Re: Zanussi ZDC47100w Condenser Dryer cuts out!

Hi. I found this forum topic and was delighted as the original fault is almost the same as the one I am experiencing, (press the start button, machine starts then beeps and stops – does this on occasion two to three times before getting going). I tried the two tests.

The first, holding the start button and one other then turning the dial – and then turning it on 10 clicks left us with the machine neatly cycling through all the lights, one at a time.

The second, moving the dial to a start point other than setting one, then holding start and any other button gave a clear result – 8 red followed by three green.

Any assistance in pointing me towards the next best move really appreciated.

Steve

[Author]

Posts