madrat

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 306 total)
1 2 3 … 19 20 21
  • Author
    Posts
  • January 1, 2016 at 10:51 pm in reply to: Can I get a Non Sealed Tub Washing Machine Sub £500? #433361
    madrat
    Participant

    Re: Can I get a Non Sealed Tub Washing Machine Sub £500?

    I cant stand this “sealed for life” s#it

    Everything is going like it 😡

    I can’t understand how it’s more environmentally friendly to throw something away instead of fix it? Recycle is great but re use is much better.

    December 1, 2015 at 5:25 pm in reply to: Bosch instructions #433280
    madrat
    Participant

    Re: Bosch instructions

    thanks

    May 7, 2015 at 9:55 pm in reply to: Bra Wire trapped in Beko DCU 7230 W #426506
    madrat
    Participant

    Re: Bra Wire trapped in Beko DCU 7230 W

    Or get a new wife it might be easier in the end 😆

    May 7, 2015 at 9:38 pm in reply to: low pressure washing machine (0.3 bar) #426678
    madrat
    Participant

    Re: low pressure washing machine (0.3 bar)

    Easy way round that is to turn off inlet valve when not in use, just make sure you put the valve in an easy to get at place.

    January 11, 2015 at 10:54 pm in reply to: ISE 5 Noisy drum #423323
    madrat
    Participant

    Re: ISE 5 Noisy drum

    I was my first time.

    January 11, 2015 at 9:18 pm in reply to: ISE 5 Noisy drum #423321
    madrat
    Participant

    Re: ISE 5 Noisy drum

    Took me 6 hours when I did it on our Beko and I was knackered at the end of it. Last hour was re fitting the kitchen cupboard door I knocked off when the drum assembly went one way and the case went the other 😳

    September 15, 2013 at 5:54 pm in reply to: water filter vacume #401203
    madrat
    Participant

    Re: water filter vacume

    From what I have found on the net they seem to be a far east thing now, although KARCHER make one and there is one on Amazon.
    http://www.amazon.co.uk/Aqua-Laser-cyli … um+cleaner

    September 15, 2013 at 5:23 pm in reply to: water filter vacume #401201
    madrat
    Participant

    Re: water filter vacume

    😀 dyslectic fingers and some how managed to turn spell check off.

    September 15, 2013 at 3:55 pm in reply to: dc24 & dc25 brush motor. #400403
    madrat
    Participant

    Re: dc24 & dc25 brush motor.

    Well have looked at 3 machines 1 dc24 and 2 dc25s the dc24 just needed the reset button pressing :rolls: but on both dc25s the brush motors have had it. Have found the motors on internet for just under £30 but what are the chances of the circuit board controlling them being damaged by the motor going?

    September 6, 2013 at 9:30 pm in reply to: dc24 & dc25 brush motor. #400402
    madrat
    Participant

    Re: dc24 & dc25 brush motor.

    Me thinks an investigation of a few brush heads coming on and maybe a few drinks from some grateful work mates 🙂

    September 4, 2013 at 12:55 pm in reply to: Dyson dc04 motor #400246
    madrat
    Participant

    Re: Dyson dc04 motor

    I dismantled the DC04 last night (not as easy as a hoover junior) and it seams the nut that holds the fan on decided to make a brake for freedom. New motor found on ebay for £16 delivered so should be up and running again soon. Not looking forward to getting it back together though.

    September 2, 2013 at 10:08 pm in reply to: Dyson dc04 motor #400245
    madrat
    Participant

    Re: Dyson dc04 motor

    That’s what I thought but was just checking. Brushes are widely available on ebay.

    July 3, 2013 at 4:22 pm in reply to: BEKO have gone to the dark side. #397194
    madrat
    Participant

    Re: BEKO have gone to the dark side.

    😯 Attractive looking…. :tdown:

    I know it’s not environmentaly friendly but I will stick with the cheaper stuff. Old Beko lasted nearly 5 years before bearings started to get noisy. New Beko cost £220 so divide that by 4 years comes to £55 a year I can live with that. My neighbour has had 2 indeshits in the same time.

    July 3, 2013 at 4:03 pm in reply to: BEKO have gone to the dark side. #397192
    madrat
    Participant

    Re: BEKO have gone to the dark side.

    V-Zug ??? who are they?

    July 3, 2013 at 1:09 pm in reply to: BEKO have gone to the dark side. #397186
    madrat
    Participant

    Re: BEKO have gone to the dark side.

    Who makes split tubs now then?

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 306 total)
1 2 3 … 19 20 21