madrat

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 306 total)
1 2 3 4 … 19 20 21
  • Author
    Posts
  • January 20, 2012 at 12:13 pm in reply to: BEKO no go! #367320
    madrat
    Participant

    Re: BEKO no go!

    LOL

    Thank

    January 17, 2012 at 6:16 pm in reply to: BEKO no go! #367318
    madrat
    Participant

    Re: BEKO no go!

    New brushes came today and looked identical to the old ones.

    Fitted and 🙂 machine burst into life.

    Was noisy at first and there were some sparks but after a spin cycle noise and sparks have disappeared.

    Thanks to everyone for there help.

    :wave:

    January 16, 2012 at 6:36 pm in reply to: BEKO no go! #367317
    madrat
    Participant

    Re: BEKO no go!

    Thanks, my dad has given me something very like that, he said he has had it for about 35 years. Nearly as old as me. 😯

    January 15, 2012 at 11:04 pm in reply to: BEKO no go! #367315
    madrat
    Participant

    Re: BEKO no go!

    ok thanks

    January 15, 2012 at 9:32 pm in reply to: BEKO no go! #367313
    madrat
    Participant

    Re: BEKO no go!

    will do thanks.

    What do I clean the motor contact with?

    January 15, 2012 at 9:14 pm in reply to: BEKO no go! #367311
    madrat
    Participant

    Re: BEKO no go!

    I will keep an eye on them when fitted, thanks for the tip.

    January 15, 2012 at 8:26 pm in reply to: BEKO no go! #367309
    madrat
    Participant

    Re: BEKO no go!

    Great thanks guys.

    Just found a pair on Ebay for £5.90 with free postage Not genuine BEKO but who cares at that price. 😆

    January 15, 2012 at 8:10 pm in reply to: BEKO no go! #367307
    madrat
    Participant

    Re: BEKO no go!

    😳 I know it’s not a good idea but the last machine that had the brushes go when you did this the drum tried to move ant there were lots of sparks to confirm the problem, but nothing this time.

    Anyway I have the brushes and yes they are worn down to the limit of travel, and 1 more than the other. They are available on the part bit for £15.64. :tup: Could someone please confirm for me I have the correct ones, part number 371202410. Nice to see things held in by the good old Philips screw and not a torxs bit for a change. 😀

    By the way what do I clean the contact on the motor with, I can’t remember.

    January 15, 2012 at 7:46 pm in reply to: BEKO no go! #367305
    madrat
    Participant

    Re: BEKO no go!

    Ok I’m off to tip the machine over, back soon

    Thanks :penguins:

    January 15, 2012 at 7:41 pm in reply to: BEKO no go! #367303
    madrat
    Participant

    Re: BEKO no go!

    No drum didnt move at all.

    I tried moving it by hand when I started the program but it still wouldnt go.

    September 4, 2011 at 11:05 pm in reply to: Caravan Fridge Help #358283
    madrat
    Participant

    Re: Caravan Fridge Help

    😯 I don’t believe it. Partmaster have one for £62.99

    Bet its out of stock when I try to order it :rolls:

    September 4, 2011 at 11:01 pm in reply to: Caravan Fridge Help #358282
    madrat
    Participant

    Re: Caravan Fridge Help

    True but they are all slightly different to mine, They have a combined gas valve/thermostat, mine are separate. typical really, suppose I could fit a combined unit. Defiantly not paying £133+

    September 4, 2011 at 10:49 pm in reply to: Caravan Fridge Help #358280
    madrat
    Participant

    Re: Caravan Fridge Help

    Dam, Looks like I will have to trawl for a used one. How would I find a alternative that would fit?

    Defiantly says 00921120306 on the sticker

    September 4, 2011 at 10:35 pm in reply to: Caravan Fridge Help #358278
    madrat
    Participant

    Re: Caravan Fridge Help

    OK

    Prod NO. 00921120306

    September 4, 2011 at 10:18 pm in reply to: Caravan Fridge Help #358276
    madrat
    Participant

    Re: Caravan Fridge Help

    What wouyld it look like?

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 306 total)
1 2 3 4 … 19 20 21