MattyD

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Samsung RL33SBNS – error code #345793
    MattyD
    Participant

    Re: Samsung RL33SBNS – error code

    I found a manual online and it indicates that this combination of flashing lights indicate that it’s a freezer temp sensor malfunction.

    Relatively cheap to replace, so I will try that and see if normal service is resumed.

    Matt

    in reply to: Neff Hob ignition sticking on #185805
    MattyD
    Participant

    Re: Neff Hob ignition sticking on

    Thanks for your reply.

    Not sure it’s 1/ because it’s been working fine for years and all the others are fine. My suspicion is that overzealous cleaning has probably resulted in gunge being dripped down the hole until something has clogged up.

    For 2/ roughly how much for a new module + fitting?

    Thanks,

    Matthew

    in reply to: SMEG SUK91MFX Door not closing properly #162820
    MattyD
    Participant

    Re: SMEG SUK91MFX Door not closing properly

    A pair of new hinges did the job.

    Now I have to wrestle with the door to get it open, but it’s quieter and like I remember it used to be.

    At the same time I gave the inside of the glass a good clean so I can see in properly.

    Thanks for your help and advice.

    Matt

Viewing 3 posts - 1 through 3 (of 3 total)