mike412

Forum Replies Created

Viewing 15 posts - 271 through 285 (of 297 total)
1 2 3 … 18 19 20
  • Author
    Posts
  • January 10, 2006 at 9:30 pm in reply to: Homark Dishwasher #160344
    mike412
    Participant

    Re: Homark Dishwasher

    Many thanks Richard, order on its way.

    Isn’t UKW just wonderful?.

    Regards,

    Mike.

    January 9, 2006 at 8:19 pm in reply to: Homark Dishwasher #160341
    mike412
    Participant

    Re: Homark Dishwasher

    Thanks Dave for your prompt response.


    I just got confirmation back from the customer that I had taken the model number correctly.

    01.900720.

    Regards,

    Mike.

    January 6, 2006 at 5:21 pm in reply to: New World CKE 13531 grill element #160019
    mike412
    Participant

    Re: New World CKE 13531 grill element

    Try …

    http://www.elementman.com

    Worth a look.

    Mike.

    January 5, 2006 at 8:32 am in reply to: Bosch SHV4313GB/17 Dishwasher #159271
    mike412
    Participant

    Re: Bosch SHV4313GB/17 Dishwasher

    Can anyone assist with a wiring diagram for this model?.
    Thanks in anticipation,

    Mike.

    January 4, 2006 at 5:05 pm in reply to: Bosch SHV4313GB/17 Dishwasher #159270
    mike412
    Participant

    Re: Bosch SHV4313GB/17 Dishwasher

    Went back to this job today, Yes its the module- nice little burn up in the corner by the connector block. Needs a new module and connector. Customer decided to buy new d/w, so didnt persue any further. Now that the customer has seen price of new machine he has decided to have repaired after all. Has anyone seen this fault before?. Is this a straightforward module replacement or are we looking at shorts elsewhere on the machine?.
    Grateful of any advice/assistance.
    Regards,
    Mike.

    January 2, 2006 at 4:30 pm in reply to: Indesit W43T Washing Machine #158925
    mike412
    Participant

    Re: Indesit W43T Washing Machine

    Greece reports this is definately a W43T. Only 400rpm spin so one made for hotter climate than here!.
    Regards,
    Mike.

    December 30, 2005 at 7:00 pm in reply to: Bosch SHV4313GB/17 Dishwasher #159269
    mike412
    Participant

    Re: Bosch SHV4313GB/17 Dishwasher

    Martin.. Thanks for your post.

    There was no mains supply at the machine end of the inlet hose so I did not dismantle this any further. The customer indicated that he had had problems with the aquastop valve in the past but had cured it himself. I depressurised the inlet hose but no difference.

    regards,
    Mike.

    December 27, 2005 at 10:46 am in reply to: Indesit W43T Washing Machine #158924
    mike412
    Participant

    Re: Indesit W43T Washing Machine

    Many thanks Phidom. I will get an email off to Greece to get this verified.
    Mike.

    December 22, 2005 at 6:21 pm in reply to: Hotpoint Frost Free Fridge/Freezer Mod.8590 #156886
    mike412
    Participant

    Re: Hotpoint Frost Free Fridge/Freezer Mod.8590

    Defrost Heaters?.

    Mike.

    December 20, 2005 at 5:53 pm in reply to: INDESIT WIL153 Washing Machine 410302349 #158510
    mike412
    Participant

    Re: INDESIT WIL153 Washing Machine 410302349

    Thanks for prompt reply gentlemen.
    Cheers, Mike.

    December 18, 2005 at 10:25 am in reply to: WHIRLPOOL ADP262 DISHWASHER #150996
    mike412
    Participant

    Re: WHIRLPOOL ADP262 DISHWASHER

    Hi Guys.

    I dont know what I did to this on my last visit as for some weeks its been ok. Had to go back this week, again no heat, checked reading of NTC which was 75k (ambient) . Am I right in saying this is way too high?.

    Merry Christmas.

    Mike.

    December 15, 2005 at 8:53 pm in reply to: Hotpoint WMA 54 Door Latch. #158028
    mike412
    Participant

    Re: Hotpoint WMA 54 Door Latch.

    Top Man. Thanks Dave.

    mike

    December 15, 2005 at 6:02 pm in reply to: Hotpoint WMA 54 Door Latch. #158026
    mike412
    Participant

    Re: Hotpoint WMA 54 Door Latch.

    I got the customer to go and look at the machine, she says its definately a WMA54P. I have booked a call for Monday. I will be interested to see what I find!.
    Thanks, Mike.

    December 14, 2005 at 5:37 pm in reply to: hotpoint ctd00p #157682
    mike412
    Participant

    Re: hotpoint ctd00p

    If its any help the manual gives the Cycling stat as 106deg and the one shot as 143deg.

    Mike

    December 13, 2005 at 8:27 am in reply to: Embarassing Bosch question #156273
    mike412
    Participant

    Re: Embarassing Bosch question

    I am glad that Tony overcame his embarrassment to post this question as I found the replies most interesting and informative. Is the “Tank Off” method deemed the easiest way to change the circulation pump also?.
    Mike.

  • Author
    Posts
Viewing 15 posts - 271 through 285 (of 297 total)
1 2 3 … 18 19 20