[mjhservices]

helo_75 wrote:if its 2 yrs old, it will need a drum

is it vented or condenser?

Its a vented dryer

Regards Mark

[mjhservices]

Re: Td Drum rubbing

Thank you

Mark

[mjhservices]

Re: Zanussi Condencer dryer model TCE7276w

Thank you for your replys.
Is the Lumilous an electrical part because it looks like a plastic circuit board holder (from the picture on connect) and only costs a few pounds?
Regards to you all Mark

[mjhservices]

Re: Bosch Condencer Dryer Small Belt Change

boro wrote:Pretty easy job actually.

Remove main belt, and front fan blade. At the rear end of the motor is a plastic handle that holds the motor in place. Remove the wires to motor then pull handle out.

Hey presto the motor can then be removed, allowing the new belt to be fitted. Been awhile since I had to remove a motor so there may be a few extra steps involved, but it’s an easy job if memory serves. 😉

Thanks for your reply although its not that easy.
Regards Mark
http://www.mjhservices.net

[mjhservices]

Re: Bosch Condencer Dryer Small Belt Change

gegsy wrote:Do you have a model number though please Mark?

Greg

Yes its a Bosch WTL6304GB/02

Regards Mark

[mjhservices]

Re: Neff SGS43A12GB/27

Do you know how to code the module correctly? as I thought you just swapped it over.
Regards Mark

[mjhservices]

Re: Bosch D/W SGS53A02GB/07

Davecas wrote:Need help with this Bosch Dishwasher please.
We have fitted a new module assy Partno 489607.
Now cannot select the 70deg cycle..when we press the button for this programme the neon above illuminates but it also leaves the previously selected programme neon lit and commences the previous programme?. if no other programme in memory then pressing the 70 degree cycle button brings the neon above the 70deg button on but no time appears in the window until another programme is selected? and then the time appears for that programme eg: the 50 deg prog.

The engineer says that there was possibly some bumf in german in the box but he left it with the customer who has thrown it out?

The part number for this module has changed and my guess is that something needs to be sequenced to bring the 70 programme into use.
ie: universal board for machines with & without the intensive cycle?

Anyone got a clue.

cheers

Can you please send me this information.
Regards Mark
http://www.mjhservices.net

[Author]

Posts