[MrJ]

Re: Schriber APP 6403 only works on super freeze

I have bought a new machine today. Ex display at B & Q for £140.

You can consider this thread closed.

Thanks for looking.

[MrJ]

Re: Schriber APP 6403 only works on super freeze

The motor is running on fast freeze and the temperature is dropping (to what I do not know).

I just checked the freezer and the temp warning was flashing and it seemed to have defrosted slightly. I opened the doore and moved the themostat dial and it kicked into life.

Thanks
Ali

[MrJ]

Re: Whirlpool adg7540 dishwasher cold water only

I ran it through the check program again. This time shutting the door. It seems to want to do a rinse (as this si the program selected). I cancelled the program and then ran it through a 65 Degree C program and it seemed to work OK 😮 .

I am doing the same program as I type to see if it works again.

Hopefully it’s not a new board as I think I saw them for £100+.

MrJ 😉

->Edit 27-2-07
Well the machine seems to be working for the moment. If it goes again I will get a new (different brand) machine.

Thanks for your help

[MrJ]

Re: Whirlpool adg7540 dishwasher cold water only

I am having very similar problems to the OP.

Dishwasher goes through cycle but does not heat/dry.

I got a local engineer (whirlpool registered) out to have a look and they have replaced the NTC with no success (on 3rd attempt – they brought 3 different NTC parts on 2 different occasions). I have had a look at images for the NTC on other sites and they differ somewhat from mine. (mine has spade type terminals with blue wires that go to a connector.) To be honest he was stumped as he expected error codes on the panel. He kindly left me a copy of the error codes and what they mean just in case it starts flashing them. I have put the machine through a test cycle as described in the manual and all it does is start flashing when holding down the start while turning on the machine, as expected, when I start the test cycle it just steady flashes of/on with no pauses.

Anyone have any further suggestions.

TIA
MrJ 😉

[Author]

Posts