[MrTwintub]

Re: DIPLOMAT ADP8132 FILLING/DRAINING

Thanks for the quick reply. 🙂 Yes that is the fault, I thought the 5th light was lit, only because that was the programme selected. 😳

Andy

[MrTwintub]

Re: DIPLOMAT ADP8132 FILLING/DRAINING

Hi all
I have been to one of these machines, it starts by pumping then goes to pumping and filling at the same time, it then stops pumping and fills for a couple of minutes, it then stops filling and starts to pump, Then stops completely. The only flashing light I have seen is the 2nd from the left, there are five lights.
Any help would be greatly received.

Andy

[MrTwintub]

Re: Electrolux EKT6045X Cooker Fault Codes?

Hi all,
I have a call out to one of these cookers. Customer says that occasionally the clock freezes and nothing works, there is an F8 fault displayed. He says that it has only happened when the cooker is not in use, and if he turns off and on at the wall then everything is ok. The fault has only happened about 4 times in 2 months.
I can’t find any information on the fault codes, so any help would be gratefully received before I attend.

Cheers

Andy

[MrTwintub]

Re: Zanussi ZWD1262

Thanks for that guys!
I just never expected to have to change the parts so quickly. one of these machines is only three weeks old. Does anyone know if the new blower is of better quality? or am I likely to be returning to these machines on a regular basis?

Andy

[MrTwintub]

I had no problem installing it just last week.

[MrTwintub]

Hi
I was at one of these machines this week, the customer had ignored a slight burning smell for the last month or so. The pcb and edge connectors are now badly burnt. I have ordered the pcb but Zanussi are telling me that the edge connectors are not available and I will have to buy a wiring loom 🙁 Anyone know Different?

Cheers
Andy

[Author]

Posts