Mulberry

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • in reply to: Whirlpool awm 325 control dial #225652
    Mulberry
    Participant

    Re: Whirlpool awm 325 control dial

    Any ideas anybody please?

    Cheers

    in reply to: Whirlpool AWM 325 not spinning or draining #225436
    Mulberry
    Participant

    Re: Whirlpool AWM 325 not spinning or draining

    Doh!!

    Cheers

    in reply to: Whirlpool AWM 325 not spinning or draining #225434
    Mulberry
    Participant

    Re: Whirlpool AWM 325 not spinning or draining

    Thanks Clive, i am waiting on a reply from the whitegoods parts suplier to confirm which drain pump it is i need.
    If its not too expensive i will give it a whirl then contact an engineer.

    Your help is much appreciated.

    One more question, HTH? abbreviation for what? quite new to this stuff

    Thanks again

    in reply to: Whirlpool AWM 325 not spinning or draining #225432
    Mulberry
    Participant

    Re: Whirlpool AWM 325 not spinning or draining

    Thanks Clive, done that now and it seems the only potential blockage was the plastic bus pass remnants from earlier as the other pipes are clear.

    Does the drain pump kick in automatically when the machine tells it too? If this is the problem how can i check.

    Cheers

    Mike

    in reply to: Whirlpool AWM 325 not spinning or draining #225430
    Mulberry
    Participant

    Re: Whirlpool AWM 325 not spinning or draining

    I select the drain only setting and the agitator clicks on to the next cycle.

    Any suggestions?

    in reply to: Whirlpool AWM 325 not spinning or draining #225429
    Mulberry
    Participant

    Re: Whirlpool AWM 325 not spinning or draining

    Hi there,

    I did find the remainder of the plastic bus card in the top of the hose where the ball is.

    Cycle has gone through again and still not draining entirely so no spin either.

    Dial on the front seems to want to click past the spin/drain function!!!!

    Frustrated now….

    Mike

    in reply to: Whirlpool AWM 325 not spinning or draining #225428
    Mulberry
    Participant

    Re: Whirlpool AWM 325 not spinning or draining

    I will let you know the outcome as soon as Clive

    Cheers

    in reply to: Whirlpool AWM 325 not spinning or draining #225426
    Mulberry
    Participant

    Re: Whirlpool AWM 325 not spinning or draining

    Hi Clive and thanks for the quick response.

    I have drained it from the front about an hour ago and part of my daughters missing school bus pass has popped out as well. It is a credit card type of material so i am wondering if the rest of it is jammed in there somewhere.

    Off to investigate the filter in more detail,

    Thanks mate.

    Mike

    in reply to: Beko dishwasher fault #195950
    Mulberry
    Participant

    Re: Beko dishwasher fault

    Thanks Guys, it does seem as though the water is struggling to get in to be honest. I will have a look and probably make the call anyway.

    Thanks again,

    Mike

    in reply to: Beko dishwasher fault #195947
    Mulberry
    Participant

    Re: Beko dishwasher fault

    Thanks Penguin45, i tried tilting it but no excess water appeared.

    Any other thoughts before i make the call for a pro?

    Cheers

    Mike

    in reply to: Beko dishwasher fault #195945
    Mulberry
    Participant

    Re: Beko dishwasher fault

    Hi there and thanks for the reply.
    What can i do now to investigate, i am not sure if the undertray is flooded or how to get to it to be honest.

    Thanks again

    Mike

    in reply to: Beko dishwasher fault #195943
    Mulberry
    Participant

    Re: Beko dishwasher fault

    Hi again,

    Does anyone have any idea of what the problem could be?
    This washing by hand is doing nothing for my skin, even with Fairy!! 😆

    Thanks

    Mike

Viewing 12 posts - 1 through 12 (of 12 total)