[mystic.bertie]

Re: Candy Grando E08 Error – GO DF800

GODF 800/L-80
3100455312145234

I cant see any branding on the motor apart from a label saying Applied Motor Technologies, made in china

[mystic.bertie]

Re: Candy Grando E08 Error – GO DF800

r600a wrote:Hi

Tacho fault or complete motor

Bryan

Cheers mate, should i replace the tacho first, can i test the motor in any way?

I cant find the tacho spare part do i need to go to Candy for this?

[mystic.bertie]

Re: Motor Not Spinning, Water Not Filling – Whirlpool 320/4

jimluxe wrote:Don’t want to sound rude mystic, but do you have any electrical experience or test equipment as the fault is a process of elimination of a couple of parts to see if its the module
thats causing the problem

i have a cheapo multi meter lol

my electrical experience is basic ie just diy stuff really. There are electricians at my work, am i able to remove the module or other parts needing tested and ask them to have a look at it?

[mystic.bertie]

Re: Motor Not Spinning, Water Not Filling – Whirlpool 320/4

jimluxe wrote:plug out!!
remove back cover, module is bottom left side and you should see a label on it if its that type

yes is it the h8.1 module 😉

[mystic.bertie]

Re: Motor Not Spinning, Water Not Filling – Whirlpool 320/4

jimluxe wrote:do you have a H8.1 module fitted to this?

hi. i dont know what the h8.1 module is, i did a search and it shows a circuit board thingy lol. I cant see anything like that in the top, is that where it would normally be located?

[mystic.bertie]

Re: Motor Not Spinning, Water Not Filling – Whirlpool 320/4

iadom wrote:They are not totally gone but they don’t look great, sadly poor brush ends when there is still a lot of length left in the brushes is a sign of impending motor failure.

They should still be making contact with the commutator though.

yeah they were making contact and they did not appear to be stuck either. so whats next, i can get new brushes but should i test the motor to see if it has failed??

thanks again 🙂

[mystic.bertie]

Re: Motor Not Spinning, Water Not Filling – Whirlpool 320/4

iadom wrote:What do the ends of the brushes look like? They should both be nice and shiny, not rough, dark and pitted.

hi mate thanks for the reply, they are a bit pitted, i took pics so hopefully that will help determining if the brushes are faulty.

[Author]

Posts