Forum Replies Created
-
Posts
-
Re: nasty new Bosch dishwashers
not nasty just new and cheaper to produce!
whether they’ll stand the test of time …?the fill is timed and the reed switch is just used for calibration on the latest models. however the earliest models did use this reed switch to detect level on all parts of wash cycle – this being the case the pcb should be upgraded. should have checked the mushroom float (the safety level device) if the cut outs at the bottom are approx 7mm then needs replacing with new 2mm cut out version. some appliances require both pcb and mushroom replacing, others just mushroom, depending on model/age
Re: ZAN D/W not filling
Alex wrote:I have p.m’d Tom.
The best fix is a new IWMS, (Matrix) There is a valve kit and pressure switch mod kit as well, but the IWMS will still need doing. Valve kits depend on how many valves are on the IWMS.
Any NESN agents should be able to ask Stoke for the details on the valve kits. Best of luck on that one.
part no for valve kit 50271495009 ?
comes complete with instructions. a doddle after the first 50. can only be fitted to version 2 I.W.M.S (the two solenoid one) and contrary to above if the I.W.M.S ain’t blocked leave it alone!
Re: Electrolux group automatic washer/washer dryer configura
bonzaco wrote: I have got the book supplied by Hotpoint but can,t make head nor ass of it. ‘
does the problem just lie in the understanding of hexidecimal/ binary…if you have the information at hand ?
Re: Bosch diswasher showing “F”
“F” in display is “water intake period exceeded” as Martin wrote, and it tells customer in instruction manual how to reset and clear fault code
