newgas

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 30, 2012 at 11:06 pm in reply to: Indesit 1W C6125 #382044
    newgas
    Participant

    Re: Indesit 1W C6125

    How much is board roughly?

    September 30, 2012 at 12:53 am in reply to: Indesit 1W C6125 #382042
    newgas
    Participant

    Re: Indesit 1W C6125

    Thanks for the clarification, I am gonna have a go at the search facilty with an I instead of a 1

    September 29, 2012 at 5:46 pm in reply to: Indesit 1W C6125 #382040
    newgas
    Participant

    Re: Indesit 1W C6125

    I talked to owner and theys say the engineer who came out checked the stuff with his meter and said the circuit bord is faulty.
    Why the winky?
    I know the model no. , cos I put it there.

    September 29, 2012 at 5:28 pm in reply to: Indesit 1W C6125 #382038
    newgas
    Participant

    Re: Indesit 1W C6125

    Just a solid red light with a lock symbol next to it , but I think that is the door light.
    No error message.

    July 9, 2012 at 4:58 pm in reply to: Zanussi IZ 141 S #377803
    newgas
    Participant

    Re: Zanussi IZ 141 S

    Have just ordred the part from ebay for 15.50 inc. 1st class delivery.
    Not bad.
    Thanks slyp98

    July 8, 2012 at 3:34 am in reply to: Zanussi IZ 141 S #377801
    newgas
    Participant

    Re: Zanussi IZ 141 S

    Tried the switch from mums machine and hey presto, apparently the switch is know to take out the pcb, so I was told by a repairman
    Thanks all the same, seems like a good forum.

    July 7, 2012 at 2:07 pm in reply to: Zanussi IZ 141 S #377799
    newgas
    Participant

    Re: Zanussi IZ 141 S

    I have taken door interlock out and it maybe getting stuck or as you say maybe getting volts problem from pcb.
    can new pcb go straight in if it is that or does it need Manu. engineer to code it to appliance.

    July 6, 2012 at 3:26 pm in reply to: Zanussi IZ 141 S #377797
    newgas
    Participant

    Re: Zanussi IZ 141 S

    Hi , there is no water in the machine and I have drained the water that was in the filter and the little hose next to it , still no change the door is locked and the machine does’nt respond to anything.
    Thanks for the reply.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)