paddymc

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 17 total)
  • Author
    Posts
  • in reply to: Electrolux washing machine ewn 16781w #387530
    paddymc
    Participant

    Re: Electrolux washing machine ewn 16781w

    Hi Martin thanks for the help looks like another one for the scrap yard

    in reply to: Electrolux washing machine ewn 16781w #387528
    paddymc
    Participant

    Re: Electrolux washing machine ewn 16781w

    New pump in did not work so looked it the pcb and could see a chip burnt so where do I get that or can the chip be replaced I have used a solidering iron before i am not to bad

    in reply to: Whirlpool S25B RSS31 A/G American Fridge freezer #385540
    paddymc
    Participant

    Re: Whirlpool S25B RSS31 A/G American Fridge freezer

    By the way you can fix it your self plug out first then ring me I could try to talk you throu it if I can remember or if you live not to far I would do it for you if you have the parts I would help

    in reply to: Whirlpool S25B RSS31 A/G American Fridge freezer #385539
    paddymc
    Participant

    Re: Whirlpool American Fridge freezer

    Hi I have fixed some of these for friends and family. no ice and water not coming out right I fixed the pcb. but the water was still dripping did not know wait to do so for 1 year water only on to make ice then back off . Then I fix my sisters same thing water was dripping . Then my own was dripping water that is when I found out wait was the problem be cause I needed to get a new water pump in my house as there is no pressure from the Maine water coming in to the house when the pump was replaced the water in the fridge worked ok no dripping.

    So I hope this can help others
    Because maybe others do not know this

    in reply to: Electrolux washing machine ewn 16781w #387526
    paddymc
    Participant

    Re: Electrolux washing machine ewn 16781w

    Took pump of and it looks like it is burnt out so going to buy one in the ukwhitegoods store if it will fit just emailed an inquiry so see what they say and post an update

    Thanks for your help

    in reply to: Electrolux washing machine ewn 16781w #387525
    paddymc
    Participant

    Re: Electrolux washing machine ewn 16781w

    I will start at the drain punmp.But just on tooking at the pcb no burt marks i have a multimeter just need to learn how to use it. Should be ok as i have a friend how i can ring for help on using that.It is going to be a late one tonight again i will post what i come up with
    Thanks for your help

    in reply to: Electrolux washing machine ewn 16781w #387523
    paddymc
    Participant

    Re: Electrolux washing machine ewn 16781w

    Sorry it was e23 not e24

    Thanks for your help

    in reply to: Electrolux washing machine ewn 16781w #387522
    paddymc
    Participant

    Re: Electrolux washing machine ewn 16781w

    The err code is e24

    Thanks for the reply

    in reply to: hoover vision hd 8kg tumble dryer #362854
    paddymc
    Participant

    Re: hoover vision hd 8kg tumble dryer

    paddymc wrote:hoover vision hd 8kg tumble dryer not geting warm i am thinking this is the elment or thermastat or should i be looking some where else it is a frend of mines how helps me out a lot so i am going to look at it for him. power of first


    got it working i put a new elment and thermastat in it took me weeks to just look at it but one day to fix thanks for yuor help

    in reply to: hoover vision hd 8kg tumble dryer #362853
    paddymc
    Participant

    Re: hoover vision hd 8kg tumble dryer

    think you very much for your reply

    in reply to: Whirlpool American Fridge Freezer broken down – help! #142441
    paddymc
    Participant

    Re: Whirlpool American Fridge Freezer broken down – help!

    father in laws whirlpool broken down this needed work done on the back and front boards as i have done before with my f/f with the help of broddersbaldrick and was hoping he could help me again. as father in law done a defrost after it frozed up on him about 1 week later but how he has to do a defrost every 3 or 4 weeks as the frezer keeps fosting up and the frige stops working proprley can anyone help me again 😳 😳

    in reply to: whirlpool washing machine not spinning properly #307563
    paddymc
    Participant

    Re: whirlpool washing machine not spinning properly

    thinks i will give this a go. filter is ok not a thing in there i would have thought that there should have been something there thanks 🙂

    in reply to: Whirlpool American Fridge Freezer broken down – help! #142408
    paddymc
    Participant

    😀 thinks for the quick reply broddersbaldrick 😀
    if someone in my area needs help i could try to help them just send a pm

    in reply to: Whirlpool American Fridge Freezer broken down – help! #142406
    paddymc
    Participant

    father in laws whirlpool broken down this needed work done on back and front boards worked on as i have done before with the help of broddersbaldrick and was hoping he could help me here at the back of frezer on the in side there is thick frost this was there when i done the repair and i asked him to do a defrost but he did not so 2 weeks on and the fridge stoped working (no cold air) so he is doing a defrost now but could there be something else broken the post where the door met was very warm should i be work on another part of the fridge i think the number on the fridge is 85861521500 i for got to look as i have done this fridge before. broddersbaldrick i could ring you as i have your number from before thinks happy xmas to all

    in reply to: tumble dryer #298385
    paddymc
    Participant

    Re: tumble dryer

    🙂 sorry Penguin45 i have already done that and thoght that at could be seen by everyone it is a condenser dryer


    candy t/dryer numbers on it are c1c 60 01
    37616489 0412 1240
    0000
    thanks for your help Penguin45

Viewing 15 posts - 1 through 15 (of 17 total)