[PaulR123]

Re: Bosch/Siemens Washers

I’ve just got a WXLM148 and have to say it is superb, well worth paying a little extra for. Its cut the washing time down significantly and takes less drying as well – you wont be disappointed!

[PaulR123]

Re: Zanussi FX1465W Blown

Just to give you an update, an engineer came and it seems the PCB had gone. We decided it wasnt worth repairing so went and got a Siemens, relatively expensive but well worth it esp with the 5 yr warrenty.

Thanks for the advice – now to fix the squeaking tumble dryer 🙄

[PaulR123]

Well the saga continues, we got the part and fitted it with no problems now the machine beeps and the ‘end’ light flashes 5 times (the instruction manual says 4 times is the door is not closed! – it doesnt go up to 5).

This is an improvement on what we had as there was no power getting through at all. The light showing the door is shut is not coming on at all but did when we shorted the circuit – other half is an electical engineer.

I think its time to pass it over to an expert unless anyone has any ideas?

Thanks

[PaulR123]

Fantastic, many thanks for your help!

[PaulR123]

Re: Neff Cooker Hood

Penguin, the model I think is D9970NOGB either that or D-FX51-4. The filters were pretty clogged – I cleaned them this morning which is always nice so it could be the problem.
🙄
Cheers

[PaulR123]

Re: Zanussi FX1465W Blown

Thanks for the advice, the problem has now been traced to the door interlock. Will the Zanussi 4 tag model you have in your shop be the part we need?

many thanks

[Author]

Posts