[paulwgun]

Re: Diplomat ADP 8332 rumbling noise

Thanks for that, is this a relatively easy job to replace?
and what would a new pump cost?

thanks in advance

[paulwgun]

Re: Ariston margherita A1324 HELP Please

Many thanks for your help, my hands no where near the cables on live test. Probes are inserted in to spade connectors before i switch on power and power off before removing probes
Wife has now had enough as washing is piling up and gone to get a new m/c

[paulwgun]

Re: Ariston margherita A1324 HELP Please

Brushes seem ok, once it fills should heater be getting power? as there is no power going to heater ,but heater element is ok according to meter

[paulwgun]

Re: Ariston margherita A1324 HELP Please

Don’t know what i done put followed advice to push plugs etc just tried it on a 30min wash and all OK so will try a proper wash next
many thanks for your help guys much appreciated

[paulwgun]

Re: Ariston margherita A1324 HELP Please

aqualectric wrote:F8 is usually a heater related fault – remove the back panel and check the wires to the heater. The PCB should be to the left of the machine (looking in from the back). Check all the connector blocks are pushed fully home.
Did any water from the pump splash on the PCB? If it did get wet it could mean trouble. 🙁
If it still doesn’t work, click the Repairs @ banner for an approved engineer in your area.
Power off, plug out before any inspection. :plug: Stay alive!!!

HTH,

Steve.

Many thanks for your reply Steve will check this out later, just finished night shift

[paulwgun]

Re: Ariston margherita A1324 HELP Please

MY APPOLOGIES IT FLASHES 8 TIMES

[Author]

Posts