[pen0668]

Re: Hoover WD130

thanks wilf will check out but i think cust wants new machine..
taa

[pen0668]

Re: Hotpoint WM62

have you fitted the correct motor as there are analoge/didgital motors wrong ones cause problems ??

[pen0668]

Re: hotpoint wm73

i had strange prob with that machine years ago changed everything at end it was pressure switch hope this helps darren.

[pen0668]

Re: AEG Lavatherm 620

you don’t want to know??
full motor 899647408065/3 £210.37 ond distri disk
think i might have second hand one will look tomorow

darren ex aeg engineer 1970-1996

[pen0668]

Re: AEG Lavatherm 620

fan blade if needed is 899647408117 around£13
hope this helps

[pen0668]

Re: AEG Lavatherm 620

HI THIS FAULT WILL BE FAN BLADE AT BACK LOOSE/WORN CHEAP REPAIR EVEN IF YOU NEED BLADE …
REMOVE BACK PLATE BOTTOM LEFT HAND SIDE

[pen0668]

Re: hotpoint wf860

caution on some newer hotpoints with board rear of machine this board can can hold a charge for 10 mins after turning off ..
this can be identified by a large aluminium heat sink on board ..
once jou have been japed once you soon remeber this :zap:

[pen0668]

Re: AEG fault codes

have you checked ntc for problems??
also do you have model no / pnc nos
if so i will look up info for you

[pen0668]

Re: DATE FOR ZAN FREEZERS??

TAA THAT HELPS ME… 😀

[pen0668]

Re: Indesit board connections

HI HAD THIS PROBLEM MYSELF FOUND OUT WIRE WAS PULLED OUT OF PUMP WHEN CUSTOMER REMOVED BOARD HAVE A LOOK IF NOT GO TO FLASHINGH LED

[pen0668]

Re: programing eeproms on indesit machines

THANKS DAVE MIGHT TRY THAT TOOL ?? EVEN IF ONLY TO SAVE HAVING TO ORDER PRE PROGRAMED EPROMS 🙂

[Author]

Posts