[pen0668]

Re: AEG freezer wiring

hi john if you give me your email address ill send you diagram
thanks darren

[pen0668]

Re: PAT Test failure

are u sure it didnt fail on flass test some are testing appliances with no experiance on elecrics or reading all they do is buy a pat tester and go!!
i had one failing appliances it was the suppresser on flash test if you read info you cant flash test certain appliances contact manufacture if unsure
😕

[pen0668]

Re: Question on LG motors

had some info on modified back pulley this is a dd system??

[pen0668]

Re: AEG configuration code

had something similar found out if was a faulty motor puzeled us to we had fitted several boards etc before this think motor had short on it?? 😕

[pen0668]

Re: configeration codes hotpoint wma

thanks jim got email great help 😀 😀

[pen0668]

Re: configeration codes hotpoint wma

hi codes are for wma40 42 44 etc thanks darren

[pen0668]

Re: indesit is60vs dryer – wiring!

sent info hope this helps you !!

[pen0668]

Re: indesit is60vs dryer – wiring!

hi got some info on this in pdf will email if you pm me with email address thanks darren looks like its a mod and it bypasses relay??

[pen0668]

Re: FHP Motor

hi criss i used to aeg agent meny moons ago so had to change bearings on motors had to make tool for pulling pully off though not much demand now though??

[pen0668]

Re: FHP Motor

hi flash i had to make a tool for aeg motors it was made out of 1/4 extention cut groove in and fitted coller over end worked a treet used to replace bearins (well you had to when moters were £180 ++ if you want to see it ill send photo
darren

[pen0668]

Re: Hotpoint Aqualtis

BEEN TOLD FIBER OPTIC MODEL OUT THERE AS WELL ON NEW HOTPOINT ???1 FIBER CABLE AND ONE POWER LEAD HOPE THEY HAVE FIXED THERE HINGE PROBLEM AS I THINK THIS DOOR WILL NOT BOUNCE !!!!
😀

[pen0668]

Re: removeable grill element

aeg had a removable grill element not sure if new models have??

[pen0668]

Re: in line resistor for De Dietrich oven

hi kevin is thera any ratings on resister??
remeber aeg had one to drop from 240- 220 volts on the lamp
if you have rating will be able to sourse one

darren pennock

[pen0668]

Re: Strange WMA60 fault

HAD SAME PROBLEM IT WAS CURED WITH NEW CATCH BINDING ON PLASTIC LATCH PLATE I THINK HOT HAD A MOD FOR THIS??

[pen0668]

Re: ENERGY REGULATER

THANKS FOR THAT WANTED CONVERSION CHART IF POSSIBLE

THANKS DARREN

[Author]

Posts