Forum Replies Created
-
Posts
-
Re: Miele Novatronic W827 not starting
Update. I cracked open the casing and took out the brush box. Brushes look well worn, about 10mm of carbon left. I think the new brish would have about 30mm of carbon.
So is this likely to be the problem? how do I test the brushes or is it best to order a new set and see if it does the trick?
Peter
Re: Miele Novotronic W827 not spinning at cycle end
The machine is behaving itself and the fault has not re appeared. It was the spin status light that was flickering. The drain and inlet lights were not on and both were checked and clear. I suspect therefore that it was either an overload sensor or something to do with the spin command.
I will wait and see if it comes back.
Peter
Re: New World Series 2 Gas Cooker – main oven not functionin
Dave
Checked the clock timer was set to manual and it was. The oven strangely started working again today but I have now switched it off and called a Corgi man from your list. Clearly a component beginning an intermittent fault. Thanks for your help.
Peter
