PGS

Forum Replies Created

Viewing 15 posts - 211 through 225 (of 321 total)
1 2 3 … 14 15 16 … 20 21 22
  • Author
    Posts
  • April 10, 2008 at 10:45 am in reply to: ZWD1471s #248484
    PGS
    Participant

    Re: ZWD1471s

    thanks guys.

    April 9, 2008 at 7:25 am in reply to: ZWD1471s #248481
    PGS
    Participant

    Re: ZWD1471s

    Chris I tried that number in connect even without the zeros and come up with nothing ,would you please check it cheers Paul.

    March 25, 2008 at 9:43 pm in reply to: Any G.I.A.S. engineers out there ? #246357
    PGS
    Participant

    Re: Any G.I.A.S. engineers out there ?

    These guys are on 1 minutes notice if they divulge any company info.

    March 20, 2008 at 5:27 pm in reply to: Hotpoint TDC32 #246522
    PGS
    Participant

    Re: Hotpoint TDC32

    Just the heat, have checked rear stats and they are 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} ok.

    March 3, 2008 at 8:52 pm in reply to: Belling Hob CTC365 #244859
    PGS
    Participant

    Re: Belling Hob CTC365

    Cheers Chris do you happen to know price as I dont YET have an acct with masterpart.

    February 21, 2008 at 10:29 pm in reply to: help hoover ac274 softwave #243919
    PGS
    Participant

    Re: help hoover ac274 softwave

    Try posting in trade spares

    February 20, 2008 at 5:12 pm in reply to: Hotpoint WF225 module #243742
    PGS
    Participant

    Re: Hotpoint WF225 module

    Thanx Jim.

    February 8, 2008 at 7:24 pm in reply to: Shop@ #242301
    PGS
    Participant

    Re: Shop@

    Got mine the next day. Excellent service again cheers.

    February 8, 2008 at 7:09 pm in reply to: Bosch WFL2066 door seal #242659
    PGS
    Participant

    Re: Bosch WFL2066 door seal

    Thanx gegs

    February 4, 2008 at 5:15 pm in reply to: LG TDC70040 #242173
    PGS
    Participant

    Re: LG TDC70040

    The 10 micro farrad caps fail and drum may have stoded still while heaters were still on with no air circulation.I would change cap.

    February 2, 2008 at 8:52 am in reply to: Zanussi start button #241805
    PGS
    Participant

    Re: Zanussi start button

    Get your Megger out and do some fault finding. heater,Motor etc you will find something down to earth.

    February 1, 2008 at 7:36 am in reply to: pab ltd uk hoods #241735
    PGS
    Participant

    Re: pab ltd uk hoods

    I think your model no will be hdi600sv ,not hdi60sv and the PCB which includes microswitch is pt No 20136027 available from JTM 01909569599, it wont be an arm and a leg so probs worth repairing.

    January 31, 2008 at 8:41 pm in reply to: pab ltd uk hoods #241733
    PGS
    Participant

    Re: pab ltd uk hoods

    LET ME KNOW WHAT YOU WANT AND ILL TRY AND FIND PT NUMBERS .

    January 25, 2008 at 5:08 pm in reply to: Zanussi FLS1186W #241080
    PGS
    Participant

    Re: Zanussi FLS1186W

    I had this years ago with a hoover logic, what was happening was when coil warmed up it went open circuit and when cool would fill for a few seconds and on and on worth a try, let us know .Paul.

    January 24, 2008 at 6:58 pm in reply to: LG TUMBLE DRYER #240650
    PGS
    Participant

    Re: LG TUMBLE DRYER

    yip 10 micro farrad is what you want.

  • Author
    Posts
Viewing 15 posts - 211 through 225 (of 321 total)
1 2 3 … 14 15 16 … 20 21 22