Forum Replies Created
-
AuthorPosts
-
philguitar
ParticipantRe: whirlpool 3r awz480e
the part number you need is 481928228665 thats both stats 🙂
philguitar
ParticipantRe: can a company not pay you if it snows
thanks guys the only thing is as most of us my company van is at home my work is sent to there i dont go to the office 170 miles away so the way i see it is im at work the min i get in my van as that is my “office” so how can they deduct pay because your “office” wont move i think i need a 4wheel drive office lol if i get deductions i will fight it they supply the van for you to do the job if its not able to do that how can that be our fault ?
philguitar
ParticipantRe: teka als131300e no heat
thanks chris 😀
philguitar
ParticipantRe: Whirlpool Dryer Element?
the element you should fit is 481231018585 this a 1900w element the you quoted is 481225928679 a 2050w element hope this helps 🙂
philguitar
ParticipantRe: Whirlpool american fridge freezer
please dont bypass the bimetal its there for a reason change it but dont bypass it controls heat and brings the board out of defrost 🙂
philguitar
ParticipantRe: Whirlpool american fridge freezer
could be the bimetal stat part number 481232058132 it could be stuck in defrost it is behind the panel in the freezer power off and unplug first 🙂
philguitar
ParticipantRe: Known Error Codes
Whirlpool W/M AWO/D series
[F00]pump triac failure
[FH] no water inlet
[FA]aquastop
[FP]drain failure
[F5] ntc
[F6] tacho (no motor action)
[F7] triac short
[F8] heater o/c
[F9] overflow
[F10] motor control thermal
[F11] comunication
[F12] element short
[F13] dispensor circuit failure
[F14] eeprom failurephilguitar
ParticipantRe: Whirlpool AWM8163 F8 error?
f8 is heater open regards phil
🙂philguitar
ParticipantRe: whirlpool dishwasher error code REQ
hi f9 is cotinuous water inlet hope this helps regards phil
philguitar
ParticipantRe: Whirlpool D/W ADG7340 not washing
check the “BEND” from the heater sometimes they collapse check when running with the cover off you will see it if it is that phil
philguitar
ParticipantRe: Bournemouth bother
all i can say is good luck got our tribunal shortly no how you feel
philguitar
ParticipantRe: whirlpool f/f
thats what i would go for changed a few have you got the 12 digit model number will give you part number
philguitar
ParticipantRe: REDUNDANCY ROGUES
brian please answer this has link appliance ltd gone in to insolvancy as you said it was going to or not ?
philguitar
ParticipantRe: new door for whirlpool?
your machine is quite old overten years i bet you would not get a new part i think you will find its not a model on the whirpool disc sorry 😥
February 13, 2008 at 10:28 pm in reply to: Hi, Whirlpool AWM049 Washing Machine Water Stop LED Problem #242865philguitar
ParticipantRe: Hi, Whirlpool AWM049 Washing Machine Water Stop LED Prob
could be you have a leak as these ones have a float in the base and will put the pump on if the base fills up with water if you tip the machine you may find water comes out of the base best to get it checked out dont forget to unplug first 8)
-
AuthorPosts
