piperh

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Indesit washing machine WIN 602 (EU) #459286
    piperh
    Participant

    Thanks for the tip. I tried the quick test but machine didn’t respond so I ruled out the brushes, as suggested. In the end a technician replaced a fried circuit board

    in reply to: Indesit washing machine WIN 602 (EU) #459284
    piperh
    Participant

    Thanks. I assume I’d access the motor by removing the back cover, yes?

    in reply to: Zanussi ZWH 6120P, flashing start button #438874
    piperh
    Participant

    Re: Zanussi ZWH 6120P, flashing start button

    It seems to me that the child lock is not activated (the door closes normally).

    in reply to: Zanussi ZWH 6120P, flashing start button #438872
    piperh
    Participant

    Re: Zanussi ZWH 6120P, flashing start button

    Thanks for the suggestion. But the flashing is continuous when the machine is connected to the power and doesn’t stop regardless of the control position or buttons pressed.

    in reply to: Whirlpool AWM759-1 washing machine, no spin #326429
    piperh
    Participant

    Re: Whirlpool AWM759-1 washing machine, no spin

    thanks v much – that procedure worked.

    I inherited the machine in a house and don’t have the manual so thanks again for the tip.

Viewing 5 posts - 1 through 5 (of 5 total)