[planenut]

Re: Creda TVS3 – Belt replacement – fitting

Anyway, well done Sheka.
Obviously the advice given on the site, and a sensible approach has paid off. As to the build up of fluff inside the machine I have found on several occasions this is due to an ill fitting extraction tube previously fitted by experts in the factory. As you are aware now of the build up, if it has happened on your next check, have a look at the pipe through which the air passes before leaving the vent to make sure it is sitting tight on the flanges.
(these words may not be the correct descriptive ones but you will understand what I mean)
Good luck.

[planenut]

Re: Hotpoint washing machine overheating

Hi thanks for your attention: originally I did not take the lid off. I took it off today to check all the connections and the panel fitting but could not see any cause there.
Planenut

[planenut]

Re: Felt bearing for Zanussi

Thanks for the information as to the question regarding the felt bearing – as to the model number? that wasn’t vital to the question which was answered,
Thankyou to all the tolerant informants on this site, it really makes good reading.
planenut

[planenut]

Re: Bosch Maxx WFO 2460 pump filter

Many thanks for a rapid reply, i’ll have another go when I get home.
planenut

[planenut]

Re: Silly question?

Many thanks for that, it helps on my next attack!
planenut

[Author]

Posts