prolink

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 17 total)
  • Author
    Posts
  • in reply to: Samsung RSH7ZNRS advice #449926
    prolink
    Participant

    Re: Samsung RSH7ZNRS advice

    Thanks for your help Bob 🙂

    The freezers reached the best temp of -10 today so it looks like i’ll have to shop about for a new unit but I think i’ll give Samsung a swerve for my next fridge/freezer.

    Haha, thanks again Bob :tup:

    in reply to: Samsung RSH7ZNRS advice #449924
    prolink
    Participant

    Re: Samsung RSH7ZNRS advice

    I’ve changed 2 temperature sensors in the freezer but still have the same problems. 🙁

    in reply to: Samsung RSH7ZNRS advice #449923
    prolink
    Participant

    Re: Samsung RSH7ZNRS advice

    Are the forums still used by “the people that can help and support”?

    in reply to: Samsung RSH7ZNRS advice #449922
    prolink
    Participant

    Re: Samsung RSH7ZNRS advice

    Spoke with Samsung via chat and i asked if it could be the compressor on its way out and i was told “It may be, since it produces unusual sounds. It may also be the thermostat that is supposed to regulate the cooling of the appliance.”

    If its a thermostat is this a possible self fix and if so can i buy the part from here?

    They gave me a number for an service engineer company that is miles away and said “Rest assured that getting in touch with our service centre will have your appliance repaired with the same level of expertise at a fair price.”

    If its the compressor i was told “the motor of the appliance has a 10 year part warranty. If it is the one that is faulty, you will not pay for the new one. However, there will still be charges with the labour.”

    What sort of cost should i expect to pay for the labour if its the compressor that needs replacing?

    Thanks in advance

    in reply to: Samsung RSH7ZNRS advice #449921
    prolink
    Participant

    Re: Samsung RSH7ZNRS advice

    I’ve taken the panel off the freezer, everything look ok?
    I have noticed the there are small cracks either side as shown on the photos.

    in reply to: Samsung RSH7ZNRS advice #449920
    prolink
    Participant

    Re: Samsung RSH7ZNRS advice

    Any recommendations for a repairer in the NE24 area please as it’s got me baffled.

    in reply to: Samsung RSH7ZNRS advice #449919
    prolink
    Participant

    Re: Samsung RSH7ZNRS advice

    Temperature is staying around -6 inside the freezer.

    Any clues to what it could be anyone?

    Thanks 🙂

    in reply to: Hotpoint WF860 – Whats this piece off? #358599
    prolink
    Participant

    Re: Hotpoint WF860 – Whats this piece off?

    All sorted iadom, Your advice was spot on.

    Thanks again 🙂

    in reply to: Hotpoint WF860 – Whats this piece off? #358597
    prolink
    Participant

    Re: Hotpoint WF860 – Whats this piece off?

    Yes, i believe it has iadom.

    It had the whole outer drum replaced a while ago.

    So would this be put back in via the top of the machine or from underneath the machine?

    Is the machine still safe to use without this part being put back?

    Thanks a billion for your help 🙂

    in reply to: SR2028 Access to bottom panel? #340927
    prolink
    Participant

    Re: SR2028 Access to bottom panel?

    I’ve done everything i can think of.

    There is no smell coming from inside the fridge and we have moved and scrubbed everywhere surrounding the fridge.

    One thing very apparent is the smell became stronger the day we moved the unit.

    It’s that bad it’s looking like i’m going to have to scrap the fridge freezer and buy a new one 🙁
    Can’t really afford to do it but i definitely cant live with the stink and the wife constantly whinging about it, lol.

    Any suggestions for a replacement and what to do with my old one?

    in reply to: SR2028 Access to bottom panel? #340925
    prolink
    Participant

    Re: SR2028 Access to bottom panel?

    Anyone? It’s stinking 😯

    in reply to: Samsung SR-S2028CSS fault #323567
    prolink
    Participant

    Which parts do I need as I’m desperate to get this fixed.

    in reply to: Samsung SR-S2028CSS fault #323565
    prolink
    Participant

    Re: Samsung SR-S2028CSS fault

    Hi Bryan,

    Did you get any of my emails?
    I haven’t had a reply yet mate.

    in reply to: Samsung SR-S2028CSS fault #323564
    prolink
    Participant

    Re: Samsung SR-S2028CSS fault

    Email sent, let me know what i need to do.

    Thanks,
    Paul

    in reply to: Samsung SR-S2028CSS fault #323563
    prolink
    Participant

    Re: Samsung SR-S2028CSS fault

    Cheers Bryan,

    Once again you’ve come to the rescue 🙂

    I’ll email you now 🙂

Viewing 15 posts - 1 through 15 (of 17 total)