[rawhead]

Re: Hoover softwave auto-washer 1000

Just ran another cycle from the start and door release is stuck again 😥

[rawhead]

Re: Hoover softwave auto-washer 1000

The door just opened 😯

Is it OK to use now? One way to find out… 😀

Thanks guys
Cheers

Jon

[rawhead]

Re: Hoover softwave auto-washer 1000

Thanks for the speedy feedback 🙂

suedehead1:
I took the both hoses off (and removed the pump for a check) no blockage. A little water drained, made no difference.

helo_75
Tilted it back for 1 min then tried door (whilst still tilted back) door still wont open.

Cheers

Jon

[rawhead]

Re: Hoover softwave auto-washer 1000

Gone wrong again 😥

Done all the usual checks. Checked the pump. The pipe that drains the water away is clear.
Spin cycle finishes but the door release wont engage. I want my washing!

Anyone now how to release the door? Or what the problem could be?
I’ve had the top off, found where the push switch goes, gave it a tug no help.

Thanks in advance.

Cheers

Jon

[rawhead]

Re: Smeg DWF1.1 continually cutting out

Penguin45 wrote:SAME BASICS APPLY.

Penguin45.

Thanks Penguin 🙂

I replaced the soap dispenser last year. That fixed the problem I was getting then.
If I’m lucky its the Mains suppressor (If I can buy another one that is)
If not its the board 😕

Have since read a similar thread. “two short beeps followed by a brief burst of the pump, pause, then repeat” is exactly what I’m getting…

Think I will also send my PCB to QER.

If that doesn’t work a new dishwasher it will be! Not spending more than £200 this time!!!

Thanks again.
Jon.

[rawhead]

Re: New Dishwasher

Goatboy wrote:Ish! Just another 100 squid for the really good stuff ❓ (ISE, BSH etc)

Thanks for that Goatboy.
If the extra £100 really makes a difference.
I’ll consider both pricepoints. £300 and £400 ……..

[rawhead]

Re: New Dishwasher

Thanks for that Jim

don wrote:
Freestanding or integrated (with a wooden door on the front) ?
Don

Freestanding thanks Don.

Budget around £300

Cheers

Jon

[rawhead]

Re: Belling Format 647

Thanks for the suggestion Martin 🙂
Fan seems to be working fine….

Door seal also seems OK.

[rawhead]

Re: Hoover softwave auto-washer 1000

Wahoo! 😀
Cheers Penguin45 you’re a star!!! :tright:
Got the pump off to find a hair clip firmly wedged in the pump paddles. :bang:
Full wash just completed no problem.

How about Batty for assistant manager?

Cheers

Jon

[rawhead]

Re: Hoover softwave auto-washer 1000

Penguin45 wrote:You pulled the hose off it, if I read your first post correctly 😀 .

Power off, first.

Penguin45.

Cheers. I’ll give it try .. 🙂

Leeds lost again, so much for the mcallister effect… 😥

[rawhead]

Re: Hoover softwave auto-washer 1000

Penguin45 wrote:Have you actually removed and dismantled the pump?
Power off beforehand.

Penguin45.

No. Not even sure which bit is actually the pump…

[rawhead]

Re: Smeg DWF1.1 Soap Dispenser

🙂 🙂 🙂

Yahoo! Just put the new soap dispenser in and it’s fixed! 😀

Thanks to this place, saved £400 on a new machine. Cheers guys…

Bought the Dispenser from espares for £31.49 + with 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} quidco
http://www.quidco.com/?search=espares
Well worth joining if you’re not already a member…

[rawhead]

Re: Smeg DWF1.1 Soap Dispenser

clivejameson wrote:We are unable to give complete instructions in case you or anyone else reading this post injures themselves…suffice to say that this repair isn’t rocket science, the dispenser is in the door so that’s the bit you need to open up. The dispenser fixings will then be obvious 😉

Don’t forget to unplug before doing anything :zap: and watch out for razor sharp door edges 😉

Thanks :tup:

[Author]

Posts