Forum Replies Created
-
Posts
-
Re: Hotpoint WD860 31135 Display says ON and the red light
one of the buttons stuck,take board out and check buttons or child lock on maybe??
Re: hotpoint wmud 960
sorry never even noticed that model was incorrect, think he meant WMD960.
could well be incorrect file setting on board or wrong board as you have said iadom
Re: hotpoint wmud 960
maddie wrote:Can anyone give me advice number of problems with machine.
1 no water inlet at valve.changed for new as other was burnt out also got a recondition module from a company on a exchange basis.Now when i power up and select awash pump starts for 2 seconds and cuts out and repeats it self over and over again.also water switches on and cuts of after 1 second and keeps repeating this.After about 7 mins it displays F02 fault.i have cleaned filter but found nothing.i have checked wiring on module and all are snug and tight.Any help please i am a lost with this now
Maybe the new module faulty or wiring from motor to module faultyF02 is motor tacho fault
Re: Indesit WIDL126 very bouncy
Morning
is it spinning ok, have you check your pump filter for any blockages? could also be suspension needing replaced or suspension pin maybe that’s came out.
as always unplug appliance
Re: Cannon CH60GTCF
side panel removal – only remove 1 panel at a time…
remove main door assembly , if removing left hand side panel only
undo 11 screw at the front left hand side including the door hinge fixings or the 7 screws at the front right hand side, to whichever panel you require to remove
undo the 7 screws from the left hand or right side panel rear
pull the relevant side panel clear.
🙂
Re: Door flashing error
If the door is still locked, check carbon brushes, and make sure appliance is unplugged.
Re: Zanussi FL1281 Door Glass
check ebay item number 261101035493, trying to remember if thats same door?
just checked there, wrong door that one
Re: Hotpoint AQLF9D69UK – Parts Diagram needed
hello madangler1 , when tilting it to the side the black gromit is underneath the tank, size about of a 10p, if that helps
Re: Indesit WIDXL146UK
Wash heater – C00255452,
only thing can find for the dryer ntc is this C00264605 if that helps
Re: Hotpoint Dryer TCD970 Help
Many thanks iadom for quick reply
would you happen to have the fault code list for these
cheers
Raymond
