Forum Replies Created
-
Posts
-
Re: zanussi dryer drum nosie
Ok problem solved, took front of machine off to get to the fan, plastic style fan was loose, wobbling about at high speed, nut had fallen off and was in bottom of machine, nut tightened on to fan, front of machine and sides all back on and working fine, thank you for the help
regards
AndrewRe: zanussi dryer drum nosie
ok, replaced the rear bearing which needed done, but noise still there, have traced it to the motor, are the fans connected to the motor or about there, if so how do i get to see them, top cover and right side off already
motor at botomm lots of plastic covering fans maybe ?? how do i get into them????
regards
AndrewRe: zanussi dryer drum nosie
Ok I have worked out What I need ( I think ) rear drum shaft and rear bearing, the rear drum shaft is rivioted in, so full drum out to replace ??
if so how easy/hard is it ??
Regards
AndrewRe: zanussi dryer drum nosie
Ok we have found the problem !!! took the rear cover plate off , the drum spindle come out at the rear here, it is loose ( you can push it up and down ) took off sur clip and washer then took off round plate which should hold the spindle in place with sur clip, plate cracked and worn no where to hold spindle in place, hence drum wobbling about, also spindle of drum badly worn where it has been wobling about, can it be fixed, new plate to hold spindle or is it the end ??
thanksRe: zanussi dryer drum nosie
Thanks for the reply, yes it’s more of a vibration, how and where can i get to the fans and is it easy to fit
Regards
Andrew
