rickard

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 200 total)
  • Author
    Posts
  • in reply to: 3rgsc9455jq1 #470874
    rickard
    Participant

    Thats fantastic thank you very much Dave

    Andy

    in reply to: whirlpool fridge freezer #470698
    rickard
    Participant

    Thanks Dave
    I no longer have an account at qualtex but that stat is also wrong as the terminals are in line and wont fit into the housing. I bought one with the connection block but that was also wrong
    Many Thanks
    Andy

    in reply to: whirlpool fridge freezer #470696
    rickard
    Participant

    Thank you that is the part I need but connect are saying no longer available
    Many Thanks

    in reply to: hotpoint fdud4411x #467073
    rickard
    Participant

    Thanks Dave and Don, unit is about 2 years old but in a care home kitchen so used twice a day every day, Its used by different people all the time and just push the buttons so hard they have broken.
    Andy

    in reply to: hotpoint fdud4411x #467070
    rickard
    Participant

    Great thanks Dave
    I only need the plastic carriers so I can swap the boards over if they need programming.
    Andy

    in reply to: hotpoint fdud4411x #467068
    rickard
    Participant

    Morning
    Have you got the part no for item 7 please.
    Thanks Andy

    in reply to: hotpoint fdud4411x #467067
    rickard
    Participant

    Morning Don
    Yes item 7
    Many Thanks

    in reply to: Smeg CS19ID-6 #466695
    rickard
    Participant

    Thanks Lawrence, but the display is flicking on and off with numbers when no pan is on the hob at all. It just will all of a sudden switch itself on and numbers appear in the screen.

    Andy

    in reply to: Gorenje D8565nb dryer fault code #464725
    rickard
    Participant

    [TABLE=”class: dxgvTable, cellpadding: 0, cellspacing: 0, width: 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}”]
    [TR]
    [TD=”class: dxgvHeader”] [TABLE=”cellpadding: 0, cellspacing: 0, width: 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}”]
    [TR]
    [TD]Error code[/TD]
    [TD] [/TD]
    [/TR]
    [/TABLE]
    [/TD]
    [TD=”class: dxgvHeader”] [TABLE=”cellpadding: 0, cellspacing: 0, width: 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}”]
    [TR]
    [TD]Problem[/TD]
    [TD] [/TD]
    [/TR]
    [/TABLE]
    [/TD]
    [TD=”class: dxgvHeader”] [TABLE=”cellpadding: 0, cellspacing: 0, width: 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}”]
    [TR]
    [TD]Cause or remedy[/TD]
    [TD] [/TD]
    [/TR]
    [/TABLE]
    [/TD]
    [TD=”class: dxgvHeader”] [TABLE=”cellpadding: 0, cellspacing: 0, width: 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}”]
    [TR]
    [TD]Process (service technician)[/TD]
    [TD] [/TD]
    [/TR]
    [/TABLE]
    [/TD]
    [/TR]
    [TR=”class: dxgvDataRow”]
    [TD=”class: dx-wrap dxgv”]F1[/TD]
    [TD=”class: dx-wrap dxgv”]F1 on display.[/TD]
    [TD=”class: dx-wrap dxgv”]• Open clamps/short circuit of the temperature sensor.
    • An error occurs if the connection between the control unit and the temperature sensor is interrupted or a short circuit between the temperature sensors. The program is stopped immediately.[/TD]
    [TD=”class: dx-wrap dxgv”]• Open clamps/short circuit of the temperature sensor.
    • Connectors, connection to NTC sensor.
    • NTC sensor.[/TD]
    [/TR]
    [TR=”class: dxgvDataRow”]
    [TD=”class: dx-wrap dxgv”]F4[/TD]
    [TD=”class: dx-wrap dxgv”]F4 on display.[/TD]
    [TD=”class: dx-wrap dxgv”]• Clogged filter, blocked air flow. An error occurs if permitted temperature of heat pump is exceeded.
    # Clean filters.[/TD]
    [TD=”class: dx-wrap dxgv”]• Cleaning the filters.
    • Check the NTC.[/TD]
    [/TR]
    [TR=”class: dxgvDataRow”]
    [TD=”class: dx-wrap dxgv”]F0[/TD]
    [TD=”class: dx-wrap dxgv”]F0 on display.[/TD]
    [TD=”class: dx-wrap dxgv”]
    • Error of the processor.
    # Restart the machine.[/TD]
    [TD=”class: dx-wrap dxgv”]• Control unit. [/TD]
    [/TR]
    [TR=”class: dxgvDataRow dxgvLVR”]
    [TD=”class: dx-wrap dxgv”]F3[/TD]
    [TD=”class: dx-wrap dxgv”]F3 on display.[/TD]
    [TD=”class: dx-wrap dxgv”]
    • Pumping error.
    # Full condensate container.
    # Hose clogged.[/TD]
    [/TR]
    [/TABLE]

    in reply to: Qualtex #464069
    rickard
    Participant

    My order which I placed 11am Tuesday was packed and dispatched the following Sunday and delivered Monday morning, Six day delivery not what you expect these days

    in reply to: Qualtex #464068
    rickard
    Participant

    This reply 3 days after order
    We are very sorry for the delay on this order, we have received it and it is currently in line to be picked and packed.
    Unfortunately we are experiencing a very busy time of year and this is causing some delays in the warehouse.
    We are doing our best to get this order too you as soon as possible.
    We are very sorry for any inconvenience this may have caused.

    Kind Regards

    Courtney Cheetham

    Trade Customer Service

    in reply to: Qualtex #464066
    rickard
    Participant

    I ordered on Tuesday 11am and only now been told there is a delay as they are busy with this time of year. My parcel will not arrive to me at the earliest Monday. This means fitting of parts on Tuesday a week after first visit. I could of ordered on ebay with next day delivery for only a few quid more and kept my customer happy

    in reply to: whirlpool wie2b19 #464393
    rickard
    Participant

    brilliant many thanks for that Dave

    Andy

    in reply to: whirlpool wie2b19 #464391
    rickard
    Participant

    Hi Dave

    Thanks for your help, the serial no is 991708016794

    Many Thanks Andy

    in reply to: Daewoo FRAX22D3S #461777
    rickard
    Participant

    Thanks for your help I will quote to the customer and get back to you
    Thank You
    Andy

Viewing 15 posts - 16 through 30 (of 200 total)