Forum Replies Created
-
AuthorPosts
-
rogue_element
ParticipantRe: is this worse job ever
Hi adv
esay job,
1) unplug
2) remove top
3) remove dryer duckett ( f/setion x1, 7mm screw )
4) remove door seal from cab edge
5) long nose pliers and remove clamp thats holds ductet on to seal.
6) pull off recir hose (do not undo clip)
7) remove rest of seal
8) refit seal on to tub and fit spring
9) this is the bit the took me 2 hrs do do, till i worked it out
refit duct on to seal, slide clap around duckettwist clip to gether THEN with a small straight egde screw driver inset and twist towards you ( it will not clip to gether) then twist and turn with long nose pliers.
10)get some washy up liquid and smear around plastic nozzle and push in to seal 1ST refitting meatl holding clip
11) refit ducket and leak test.with pratcie i had this all done in no more then 20 mins
hope this helps
rogue
rogue_element
ParticipantRe: Speed Camera Database
Thanks for that Penguin i just cr*ped my pants till i read the mesg
rogue_element
ParticipantRe: zanussi freezer stat
2262170018
rogue
rogue_element
ParticipantRe: customer wants money back!!!
Well said Martin.
rogue_element
ParticipantRe: Electrolux/Zan D/Washer – Basket runner mount
coat hanger and some sealent from the back of a f/freezer. you only ever do it once. steep learning curve
rogue.
rogue_element
ParticipantRe: Zanussi ZWD 16270W
your welcome
no worrys mate
rogue_element
ParticipantRe: Bonus fridges
ISDAL
rogue_element
ParticipantRe: Zanussi ZWD 16270W
i have two contact spares on
01772 696500
rogue_element
ParticipantRe: connector points
type in
prom points
rogue_element
ParticipantRe: connector points
Cheap g*ts
Scraped points, now you can only spend them buying cdsl clothing.
rogue_element
ParticipantRe: Smeg uk
08704215982
rogue
rogue_element
ParticipantRe: Electrolux EDI96150 Tumble Dryer
pump ???
rogue_element
ParticipantRe: Electrolux DTC50CES
Hi Barry
sorry mate not puting my name to this but try
3114 55 000 / 1 A B C Energy regulator,single,40ER101C1
up to serial no.226
3115 75 900 / 7 – – C Energy regulator,single,50.54071.070
from serial no.227rogue_element
ParticipantRe: More Zanussi motor brush confusion:?
hi martin
try 4006020152
rogue
rogue_element
ParticipantRe: Lok Ring
hi loopey
thanks for that just looked up on line .
last joints we bought were 8/4 39 pence more from hrp then vulken but worth looking at .
rogue
-
AuthorPosts
