sandysuds

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 68 total)
1 2 3 4 5
  • Author
    Posts
  • March 6, 2018 at 11:05 am in reply to: zanussi zdc 37201w #454425
    sandysuds
    Participant

    Re: zanussi zdc 37201w

    Thank you for replying Dave, Has no display and there is no heat aswell

    December 9, 2016 at 12:40 pm in reply to: Hotpoint dishwasher fdeb31010p #443259
    sandysuds
    Participant

    Re: Hotpoint dishwasher fdeb31010p

    dishwasher fills, heats up very warm on normal wash and just stays in the heat cycle for about 2 hours,could it be the stats on the heater
    sandy

    December 9, 2016 at 12:36 pm in reply to: Hotpoint dishwasher fdeb31010p #443258
    sandysuds
    Participant

    hotpoint dishwasher fdeb31010p

    hi Guys
    can anyone help.hotpoint dishwasher fdeb31010p
    Fills, heats up but just stays on heat cycle for about 2 hours
    sandy

    June 13, 2016 at 6:44 pm in reply to: whirlpool td 3rleq8033sw2 #438551
    sandysuds
    Participant

    Re: whirlpool td 3rleq8033sw2

    It only starts once the rdc is reset

    June 13, 2016 at 4:44 pm in reply to: whirlpool td 3rleq8033sw2 #438548
    sandysuds
    Participant

    Re: whirlpool td 3rleq8033sw2

    Hi Dave
    It trips the main after 15mins
    Sandy

    November 9, 2015 at 5:32 pm in reply to: Neff s5453x1gb/55 dishwasher #432374
    sandysuds
    Participant

    Re: Neff s5453x1gb/55 dishwasher

    thanks martin

    September 22, 2015 at 9:33 pm in reply to: clenware glasswasher #430439
    sandysuds
    Participant

    Re: clenware glasswasher

    Thanks for the reply Dave ,Where would i find these magnets
    Sandy.

    December 16, 2014 at 9:05 pm in reply to: hoover vhd8143d #422743
    sandysuds
    Participant

    Re: hoover vhd8143d

    Sorry it is not

    December 16, 2014 at 8:59 pm in reply to: hoover vhd8143d #422742
    sandysuds
    Participant

    Re: hoover vhd8143d

    Hi Martin
    It is

    November 26, 2014 at 1:27 pm in reply to: adp8242 #421944
    sandysuds
    Participant

    Re: adp8242

    thanks dave that would be spot on
    Sandy.

    November 26, 2014 at 12:21 pm in reply to: adp8242 #421942
    sandysuds
    Participant

    Re: adp8242

    Hi dave
    where would i get the power supply
    Or could i send it to you
    Sandy

    November 26, 2014 at 11:44 am in reply to: adp8242 #421940
    sandysuds
    Participant

    Re: adp8242

    Hi Dave
    Thats what it does 2 faint bleeps
    Sandy.

    November 26, 2014 at 10:49 am in reply to: adp8242 #421938
    sandysuds
    Participant

    Re: adp8242

    hi dave
    yes fills up and churns away ,dispenser reads ok but does not get to the stage of opening
    pcb was s/h
    Sandy.

    April 5, 2014 at 12:01 pm in reply to: bosch WAE24363gb/02 #412038
    sandysuds
    Participant

    Re: bosch WAE24363gb/02

    Thanks Martin thats what it was

    August 6, 2013 at 3:58 pm in reply to: indesit wixl126 #398491
    sandysuds
    Participant

    Re: indesit wixl126

    hi
    cannot seem to find any error codes for this model can anyone help wixl126

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 68 total)
1 2 3 4 5