[sandysuds]

Re: hotpoint wt 640

HI
thanks for your reply in the end it was a loose wire on the motor connector

[sandysuds]

Re: zanussi zwf1207wi interlock wiring

Thanks for your help seamy thats done the job
Sandy.

[sandysuds]

Re: zanussi zwf1207wi interlock wiring

YOUR,E RIGHT MODEL IS ZWF 12070W1

[sandysuds]

Re: bearing seal hoover wd/ a8754 001

Thanks for reply everyone the part no is hvr09028960

[sandysuds]

Re: zanussi zwf12070w

Hi tom
It was the pressure switch on mine and it cured it

[sandysuds]

Re: bosch wfg 2020

Thanks martin

[sandysuds]

Re: A.E.G.Dishwasher fav50610w

Thanks to all for the advice, Checked pcb visable dry joint ,repaired it machine working ok
Thank again.

[sandysuds]

Re: ZANUSSI FJ1214 NO WATER

Thanks for your help penquin you were spot on
Sandy.

[sandysuds]

Re: hotpoint 746s

Thanks for your help. it was worn motor brushes
Sandy

[sandysuds]

Re: hotpoint 746s

hi
its a wt746/1a sn 58020005

[sandysuds]

Re: hotpoint 746s

Sorry Guys
Its a WT746s hotpoint
Sandy.

[sandysuds]

Re: Whirlpool w/machine awo/d5706

may thanks to martin114 and mikehha for help have tested the wire wound resistor and it does look to be the problem have ordered one from rs
thank again guys.

[sandysuds]

Re: Zanussi zwf 12070w

Thanks for your help

[sandysuds]

Re: HOTpoint Dishwasher bfl820

Thanks for that Jim you may be right the label on the side of the door is worn so it could be bfi 620

[sandysuds]

Re: Hotpoint wm31 cuts out

Thanks for all your help guys ,much appriciated,
It turned out that the board was faulty

[Author]

Posts