[SCP]

Re: Bosch Dishwasher fill / drain problems

As far as I know i have fitted it correctly as did a like for like swop over but i am going to get back in there and double check that…

[SCP]

Re: Bosch Dishwasher fill / drain problems

The switch is this one:

http://www.bosch-home.co.uk/store/produ … h/00165256

It looks like it has got warm and bubbled the black sound insulation that it sits very close to. A bit of a shot in the dark replacing this but didn’t work.

I’ve removed the float and pressure chamber and cleaned them as well as the transfer tube that leads to the sump.

I think i’m at the end of trying to fix this myself unfortunately. The only other thing is maybe the switch did get warm but shorted something else out that connects to it.

Thanks for your replies, much appreciated…

[SCP]

Re: Bosch Dishwasher fill / drain problems

The overfill switch i guess it is and the black panel of the machine…

[SCP]

Re: Bosch Dishwasher fill / drain problems

Thanks for the reply Martin.

I’ve been trying to fix the machine with no luck still. I’ve tried changing the Impellor Jug and the Switch as there looked to be a bit of scorching on the rubber panel next to the switch on the inside but this hasn’t fixed it.

There’s definitely no blockage from the infill through to the sump so any other suggestions before I have to call out an engineer would be much appreciated.

cheers, Simon

[SCP]

Re: whirlpool generation 2000+ Problem

Not initially and I couldn’t leave the oven on long enough to check to see if it kicked in because the element was getting so hot.

If the fan would normally start up straight away then no, it’s not running…

[Author]

Posts