Forum Replies Created
-
Posts
-
electrofix wrote:yes i get that
https://shop.ukwhitegoods.co.uk/32013533-genuine-fan-oven-motor#product_more_info.tab
listed as 23W
Dave
I know what you mean from a previous comment that bush parts are a nightmare so I might end up getting a new cooker.
It’s listed as 23W but if the box says VST32013533 or FM0305 it will have a 21W part inside. Would you know if there’s anyway of finding out if they changed the motors to 21W.electrofix wrote:no problems
as long as it fits it will be fine
Dave
I contacted espares about it being different and they said send it back.
The new fan motor looks the same as the old one but the new one says P/N 32013533, Bekatech YJ61-16a HZ02 21W and my old motor says P/N 32013533, Hunan Keli.I bought a new fan motor but the seller sent me a 21 watts so can I still use it if my old fan motor is 26 watts.
I don’t know why but I think 3 mobile doesn’t like the spares website because when I try using the site with a vpn I don’t have a problem.
electrofix wrote:if it has a clock that’s the first thing to look at
after that its the selector switch most likelyAlso Bush is an argos own brand and spares are a bit of a nightmare
Dave
No it doesn’t have a clock. Would it be the selector switch if the oven heats up.
electrofix wrote:chances ar its the same manufacturer anyway
not had a lot of problems with pattern pump
Dave
Thank you for you’re help
electrofix wrote:pump can make a noise you cant believe when they go wrong. cant be repaired just replace
check the rear drum bearing as they fail a lot
https://shop.ukwhitegoods.co.uk/condenser-tumble-dryer-water-pump
but
I’ve only had the tumble dryer 18 months and it haven’t been used that much so I’m shocked it’s gone. Would you buy the pump you linked me to or would you buy the hotpoint pump.
kwatt wrote:That is the one listed by the maker for that model for sure, there’s not nay other I can see.
K.
Thank you.
kwatt wrote:Yep and it’s this one in that ovne:
https://shop.ukwhitegoods.co.uk/32036509-fan-oven-heating-element
K.
I removed the heating element and it has two splits so I tested for resistance and continuity and i’m not getting a reading. The element I removed is 2000W and part number 2035583 so is the element you posted in the link still the correct one.
