slate

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 22, 2023 at 3:40 pm in reply to: Time for a change. #486684
    slate
    Participant

    Cheers guys. I’m in N.I so service for EBAC might be limited.

    May 26, 2017 at 8:06 pm in reply to: Samsung Delivered Damaged #447761
    slate
    Participant

    Re: Samsung Delivered Damaged

    Thanks Dave, what about a repair though. Will Samsung repair it?

    November 2, 2015 at 10:58 pm in reply to: Hotpoint DWF34 #432122
    slate
    Participant

    Re: Hotpoint DWF34

    Thanks for the quick reply guys. I have checked the module and found an over-heated leg of one of the relays. Checked on Farnell and the relay is available so I may replace it and see if it sorts it. Are Hotpoint really replacing these machines after all this time?

    April 1, 2013 at 11:57 am in reply to: Belling Gas Range #392931
    slate
    Participant

    Re: Belling Gas Range

    Thanks guys, I’ll try that and pass on the info to the customer,
    Slate

    December 10, 2010 at 5:55 pm in reply to: Baumatic BEC2.1SS coffee maker #338285
    slate
    Participant

    Re: Baumatic BEC2.1SS coffee maker

    CONNECT?

    January 12, 2008 at 6:04 pm in reply to: Anyone ever heard of Neutra #239388
    slate
    Participant

    Re: Anyone ever heard of Neutra

    Cheers Brian, that’s somewhere to start anyway.

    December 1, 2007 at 10:13 pm in reply to: Creda 37764 Condenser Dryer. No Heat #235917
    slate
    Participant

    Re: Creda 37764 Condenser Dryer. No Heat

    have you checked the front stat?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)