Forum Replies Created
-
Posts
-
Re: Siwamat E-Nr WM61201GB/01 No drum action
thanks, the link is for right hand brushes, mine are left hand, I guess these would work instead?
http://shop.ukwhitegoods.co.uk/12ag03-f … ush-insert
Dimension are an exact (well within 0.01mm) match.
Re: Siwamat E-Nr WM61201GB/01 No drum action
OK, motor out, brushes out and stripped, and yep, they’re worn 😉
I guess now I just need the brush to fit in the carrier, only thing I am aware of is that these are FHD carbon, no idea what that means, anything I need to be aware of?
P.S.
One caveat – that motor is heavy… turned into an impromptu guillotine when it pinned my pinkie on the edge of the frame…. OUCH!
Re: Siwamat E-Nr WM61201GB/01 No drum action
Many thanks, I always take action on a considered and informed basis. I dont like to charge in and just start randomly undoing things, well not since….. ahem, that’s another story altogether 🙂
Will go, spanner in hand, report back later..
Re: Siwamat E-Nr WM61201GB/01 No drum action
Sorry, it was not my intention to wind you up.
This is what I can see when I lie face down on the floor, yes the ‘motor’ is accessible and I can feel the bushes, but they are on the other side of the motor right by the drum drain hose so access is not great, hence the (well I though reasonable) question as to the best way to tackle it or do I just go face down and fumble around in the dark so to speak.
Re: Siwamat E-Nr WM61201GB/01 No drum action
Easy Job? or is there a how to on here?
I have had a look where the motor is and all the parts I think I need to get to are facing towards the front of the machine 🙁
Advice on how to get at it would be appreciated… Take out the floor pan (riveted) remove the motor? or just get them out in situ?
thanks
Re: creda reflections model 48197
well i bit the bullet and had a go, its exactly as described!, all I need to do now is find a TL 8W/35 tube, dont seem to be many of that type listed, but i’ll have a butchers at the local sparky’s merchant 2mo’
thanks for all the help
