[spark]

Re: Hotpoint seal

Many thanks to Dave and iadom.
Very much appreciated.

[spark]

Re: Siemens DW problem

Many thanks Martin. I’ve got one on order.I come from the camswitch era so my knowledge of modern machines is very limited.Thanks again

[spark]

Re: Seimens extraklasse XL1000

Thanks Graham.Wall socket ok.
Will check power module.

[spark]

Re: Seimens extraklasse XL1000

Thanks Martin,got back to it today.Numbers on door frame are.
E-Nr WH54080 UK/12. FD 8108 600245.

[spark]

Re: HP WF 000 washer

Apologies for posting in wrong section.
Many thanks to those of you replied.
Most helpful.

[spark]

Re: Bayonet type discharge pumps.

Thanks funkyboogy,will try that.
The impeller has lost two of its vanes so that idea should work.

[spark]

Re: Hotpoint stuck in spin.

Iadom, I am absolutely delighted with the info you sent me.
As I’ve said on this forum before, I come from the mechanical programmer era and never got fully to grips with the digital one.
However, I “take a look “at family and friends appliances and with the assistance of your excellent forum I’ve had many successes. (Makes me think of going back to it despite age etc)
With info like this the task doesn’t seem that daunting.
Sincere thanks: spark
😀

[spark]

Re: Hotpoint stuck in spin.

Sorry iadom that address is gone.
Present one is irmike@eircom.net
Trying to avoid the spammers.

[spark]

Re: Hotpoint stuck in spin.

Thanks Tony,I’ll check that.
Machine has seen some hard work and replacing the PCB would not be justified.
Do you need my email address iadom? 😉

[spark]

Re: Hotpoint stuck in spin.

Many thanks iadom.
It is indeed a HVL.

[spark]

Re: Almost dead Beko

Thanks house_doctor,will try this and let you know the result.
As I’ve often said on this forum I come from cam switch era and never fully got to grips with the electronic era.

[spark]

Re: Hotpoint d/w

Thanks to both of you for the excellent replies.
This problem was indeed in the door stats.
One was o/c and the other had a burnt connection.
Replaced the two, remade connection and all is well.
Thanks again.

[spark]

Re: Hotpoint d/w

Thanks to bobokines and hotpnt.
Will check on these and let you know the result.

Regs.
Spark

[spark]

Re: Cost of spares

Thanks to Dave and Phidom.
Don’t do much in the domestic repair now (bit past it).

Only for a family member or a friend.

I’ll take your advice on this.

[spark]

Re: Hotpoint BFV62

Found the prob.no water in chamber but float stuck.
Thanks to Dave and iadom, wouldn’t have found it without your help.

One of the old boys [cam switch era] so the electronics still give me probs.

Many thanks,spark 😀

[Author]

Posts