[sparklz]

Re: F&P GW601-K secondary problem?!

Hi, thanks for replying!

I’ve tried putting the old module back in and that’s not doing anything either, whereas before i could at least turn the machine on.
Would replacing the motor controller be straight forward enough if i got the part? (I have no knowledge of washing machines, but good electronics basics). I’m assuming that’s the other main board that all the wires plug into. Is there a way to confirm this is the part not working, using a multimeter or something?
I’m just puzzled that it was ‘working’ before with the old module, and now won’t turn on with the old one or the new one. Unless a fuse has blown or something.

Thanks

[sparklz]

Re: F&P GW601-K error code – help!!

Do you know if I’m able to differentiate between the two using a multimeter? And if so, how? That way I can just get the part and do it myself. Thanks!

[sparklz]

Re: F&P GW601-K error code – help!!

Thanks for your help, I can feel the start button clicking when I push it. Could this have happened whilst moving the washer in the car? Perhaps from water getting into the circuit?

[Author]

Posts