[stourbridgear]

Re: HELP with Hotpoint WDL540P & Indesit WIXXE167 interlock

Cool cheers Dave. Will let you know buddy.

[stourbridgear]

Re: Hotpoint WDL540P

Got same prob now, did you fix it??

[stourbridgear]

Re: HELP with Hotpoint WDL540P & Indesit WIXXE167 interlock

And if brushes will it click, click, click etc? Thanks Dave this is good info.

[stourbridgear]

Re: HELP with Hotpoint WDL540P & Indesit WIXXE167 interlock

P.s if you search for WDL540P on qualtex you get the Quaint51 interlock??

[stourbridgear]

Re: HELP with Hotpoint WDL540P & Indesit WIXXE167 interlock

Ok that’s good info about first, thanks. I’ll check the numbers of course doh. The second, I perhaps have fitted a different lock as you say, will double check…what’s that about brushes though? Thanks for the quick answer I do appreciate it. John.

[stourbridgear]

Re: Hoover condensing dryer HNC382-80 – anyone had this prob

nigegt wrote:Funnily enough yes and it was the p.c.b. Runs one way for 10/15 mins then stops dead. (At the point where it should start reverse tumble) When you fit the new board you’ll see it stop and reverse at that point.

Nige

Ordered selco pcb 40005058. Does anyone know if this is preprogrammed out the box?

Cheers all 😆

[stourbridgear]

Re: Hoover condensing dryer HNC382-80 – anyone had this prob

Thanks Nige, valuable advice…

Everyone else, sorry it was the slip of a finger that put it in wrong category…
Simple fault finding? No problem, thank you. :p

[stourbridgear]

Re: SMEG WDI12C door seal rubbing?

Yes this seems to be the case. The drum is rotating almost on an eliptical path, yet bearings are good. Thanks fellas.

[stourbridgear]

Re: Increasing work?

Thanks fellas, all good stuff – 8 to 10 jobs per day sounds very nice!

I am grateful for your answers, and appreciate any more from others. Hope I can return the favour to some of you one day.

Cheers,

John.

[stourbridgear]

Re: Whirlpool awm8000 water tap closed error

hi just a bit of feedback, it was as silly as the in-line water filter blocked on the cold water supply…cheers guys.

[stourbridgear]

Re: Getting more work?

Thanks for your answer chaps, much appreciated. Look forward to you message squadman, sounds interesting…ta

[stourbridgear]

Re: Tecnik DW2677/2 tripping mains circuit

thanks martin, do you know what resistance reading this element should be giving by any chance? whp480140102047.

[stourbridgear]

Re: Indesit IS60V Tumble Dryer, noisy and oily marks

Thanks Martin, what would make it a costly repair? The parts or the labour?
Ta, John.

[stourbridgear]

Re: Bosch Dishwasher SHV55M03GB/73 DEAD?!

That’s what I thought, thanks Martin, I do appreciate your help. 🙂

[Author]

Posts